Example of full system run// A little about myself : I am a PhD scholarship student at the University of Huddersfield in England studying the field of bio-robotics. I have a Masters (Scholarship) with distinction in advanced animatronics and a first...
Full Description:The title of my final year Multimedia Design project (Actuality and Artificiality) is an adaptation of the post-modernist philosopher Jean Baudrillard’s ideology, Simulacra and Simulation: Simulacra as object and Simulation as process....
RSVP: https://www.meetup.com/MakeIt-NYC/events/252757006/Come hang with Hackaday at The Circle of HOPE!Attending this year's Hackers On Planet Earth? Visit us at our booth in the vendor area on Saturday, July 21st at 4:00pm for a mini-meetup! We'll...
We are using the well-known TP4056 Li-ion Charging IC to charge the Li-ion cell. We are utilizing a DC-DC Buck Module to supply a stable 5V to this circuit. It does this by converting the 12V input side to 5V 3A or QC3.0, which is plenty to power the...
First, I printed the motor carrier, then gently file the inside channel until it moves freely on the track. 3d printed parts were printed using PLA at .2mm layer height and 30% fill.Add the wheels using 3mm x 8mm screws. The wheels should turn freely,...
T1 Specifications: 28.4n/m theoretical output torque43.3n/m tested gearbox yield toque45:1 24v543g Thermal Management: The gearbox produces heat, from friction on the teeth and in the elliptical bearing, as well as from the motor and electronics....
The dimensions of the robotic lawnmower are 495x340x195 mm (length - width - height), is based on an Arduino Uno board with a shield made specifically for the control of the movement, the management of sensors and coils for the detection of buried wire,...
Start by removing the weight and making the chain into a loop. The P2-Winder sits at the bottom the the chain loop. The chain lies in a toothed chain-wheel. A motor and gearbox can turn the wheel. The original clock weight hangs below...
When I designed my latest coreXY 3D printer, Ultra MegaMax Dominator (UMMD), I wanted a tall Z axis but I didn't want any possibility of Z-wobble in the prints, usually caused by either bent or off-center lead screws. It took a few attempts, but...
The initial idea was to make a life-size version of the actual game Operation. At the first meeting, however, an idea was proposed to keep the spirit of the original, but make it instead an alien autopsy, with the patient being an alien and the ailment...
Open-Source Robot Building Kit and Development Environment The main products in this robot building kit are: 1) Ethernet Modules (PCBs) a) EthMotors - a Microchip PIC32 controls up to 12 motors (up to 2.8A each, using 12 Texas Instruments'...
Introduction Op amps are well known for their utilitarian prowess, performing many vital tasks underpinning analog circuit design. They add, subtract, integrate, differentiate, and amplify with great precision! That’s all well and good…...
I have designed this router and system to run a PFsense VM on ESXI hypervisor, using my laptop for SSH or on-network access along with a display attached as well.Please see: The updates and details for this project represent my experience making...
The EVI (Electronic Valve Instrument), a trumpet-style electronic musical instrument in the Wind controller family, was developed in the early 1970s by inventor and musician Nyle Steiner. The EVI is an endangered instrument and the EVI player is an endangered...
Short Description 40x40 t-slot profiles form the 470x500x550mm (HxWxD) sized frame. The large build volume of 300x300mm can be used with up to five Materials. This is achieved by water-cooled exchangeable tool heads. The tools do not have their own cooling,...