Materials and tools used in this project:Plywood 3.0mmAmerican walnut veneer 2.5mmCherry veneer 2.5mmScrews 1.5 x 5mmNatural mineral Oil: cleaned flaxseed or Belinka Oil (food contact)Adhesive tapeTitebond 2 (dark), Titebond 3 (white)Hot GlueDark Varnishesp32...
In the Maker community there are projects to make Virtual Reality headsets to use with the PC, but these are for wired use, so there is room for a wireless solution that does not involve using a cell phone. Currently the best: https://hackaday.io/project/187343-easy-pancake-lensesAnd...
Getting straight to the core to try to explain it simply, the anwaar amulet is a 2 piece design. The bottom board (I refer to them as the base board) can be thought of as a hyper specific development board. In this case I ended up using an attiny...
In South Africa, our electricity supply is somewhat erratic, due to around 2 decades of under-investment, and incredible levels of corruption. As a result, many residents have resorted to installing solar power, with battery backup to ride out the 2-4...
For each axis, you'll need a Lolin32 lite ESP32 boarda AS5600 boarda radial magnetized magnetsome 3D printed partssome 2.5 mm pin connectors (male and female) AS5600 is connected to ESP32 : - SCL to pin 33 SDA to pin 27 - VCC to pin 17 // used...
Manufacturing of Large Dye Sensitized Solar Cell at home from Shih Wei Chieh on Vimeo. Introduction Dye-sensitized solar cells (DSSCs) represent an easily manufacturable and cost-effective photovoltaic device and can be done at DIY level. However, its...
A geophone is a device used in geophysics to detect ground movement. It is specifically designed to measure seismic waves, which are produced by various sources, including earthquakes, and explosions. Typically consist of a mass suspended on a...
Code Details: After provisioning the EP10, configure this code for the plug name and the hours to charge before turning off. In this example a 4-hour charge time worked fine. Upon code startup if the plug is not detected (typically the EP10 is unpowered)...
Keyboard The keyboard is a PocketType miniature ortholinear 40% keyboard kit available from Mechboards - https://mechboards.co.uk with numbers and symbols accessed by layer keys. It is microswitch based and OK for thumb based typing...
This is a four voice analog/digital hybrid synthesizer with multiple audio parameter controlled lights. It's a wall-hanging work made with acrylic glass, freeform electronics, a 3D-printed enclosure and RGB lightpipes. The analog electronics are made...
There was a call-out recently asking for "hackers whose medium is art and artists whose medium is tech" and I thought, "wait... that's me!" This was the start to my first ever hackathon and art installation exhibit. All part of 'Dethrone'... [queue...
I did this project because I was annoyed with having to use my phone while driving to open the gate, which is GSM controlled by calling its number, and takes a while to open, so you really want to call in advance. This way I can just push two buttons.It...
A seismometer, is an instrument used to detect and record ground motion caused by seismic waves, such as those generated by earthquakes, volcanic eruptions, or other sources of ground vibration. Basically, the seismometer consists of two parts,...
The initial board The initial circuit was published bye "Mdog" and did exist into two versions "solo" and "4axis". Both of these boards rely on the Ti LMD1845 H bridge circuit. The LMD18245 is a full-bridge power amplifier with 2• DMOS Power Stage...