Close

8866 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격ㅱ ╈proprietary８셔츠룸후기셔츠룸추천ヰamidst 선릉셔츠룸셔츠룸추천 셔츠룸추천※셔츠룸추천ㄴhandle㏉"

  • NTSC Video on Atmel Mega644/1284

  • Details     from NTSC Video on Atmel Mega644/1284
  • Video GenerationThere are several very good references for understanding how TVs are controlled by a pulse sequence. I particularly liked the Stanford EE281 Handout #7 entitled "TV paint". Also very useful were Software generated video, by Rickard Gunée,...

  • The Quub
  • Details     from The Quub
  • QUUB is an open-source, micro controller system based on a core processor, addressable daughter boards, and remote IO modules. It is a general-purpose embedded microprocessor system, the form factor is based on a main MCU board and multiple stacked...

  • 100w LED projector conversion
  • Details     from 100w LED projector conversion
  • This project started some months back. I was given two projectors, one with a bulb, one without. Not wanting to scrap either unit, equally not wanting to spend £100 on a bulb that would be prone to shock and likely to fail, I decided a more serious...

  • Hakkedpad
  • Details     from Hakkedpad
  • The launchpad is an array of 80 buttons, and 160 LEDs, two per key. It's not touch sensitive, but all the same ... There are five 74HC164, and three 74HC165 inside. 164s (serial to parallel) drive the LEDs, and 165s read the state of the keys. The matrix...

  • GLOROLL
  • Details     from GLOROLL
  • 2015 : 1 x GloRoll. A 8' diameter steel and LED lit sphere that you can climb into. Think "atlas spheres" from American Gladiators, or if you don't want to youtube it, a metal -human sized- hamster ball.Now, not just a few glow bits, 1024 RGB Leds (yes,...

  • Autonomous Pi bot
  • Details     from Autonomous Pi bot
  • Basic Localisation and routing is implemented as can be seen above in the video.Speed control - the speed of each track is regulated by a PID using feedback from the quadrature encoders.Directional control - a PID monitoring the heading as determined...

  • LED VEST
  • Details     from LED VEST
  • OVERVIEWUsing 470 WS2811 LED strips, and a Teensy 3.0 to drive the lights. Currently playing pre-rendered animations generated in Processing (for the plasma animations) and a C# app that extract video data and compiled it into LED data. .VEST CONSTRUCTIONThe...

  • Projector Screen
  • Details     from Projector Screen
  • It's quiet and fast.It will take 10-40 hours of your life.Your toddler or his friends drawing on it won't ruin your day. This revision has worked flawlessly, with no further adjustment and with daily use, for almost 2 years now.EDIT: 3 houses and almost...

  • hackcase
  • Details     from hackcase
  • case is made from plywood found on the streets. there is some 5mm acrylic too, those i was buying cheap a4 size on ebay. wooden frame is held without glue, mostly little 3mm screws. board are mounted on 5x5cm, 10x10cm, 15x10cm wooden pieces,...

  • Install NetBSD on a PogoPlug
  • Details     from Install NetBSD on a PogoPlug
  • This HOW-TO will help you easily set up a PogoPlug to run NetBSD without needing to disassemble the device and solder on a serial adapter. When you're done, your PogoPlug will still be able to be booted into GNU/Linux but will automatically boot into...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday