Close

8866 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격ㅱ ╈proprietary8셔츠룸후기셔츠룸추천ヰamidst 선릉셔츠룸셔츠룸추천 셔츠룸추천※셔츠룸추천ㄴhandle㏉"

  • Open Indirect Ophthalmoscope

  • OverviewCurrently there are over 422 million people worldwide suffering from diabetes. 28.5% of them suffer from Diabetic Retinopathy(1) . 50% of diabetics are unaware about the risk of losing their vision(2). The number of cases of diabetic retinopathy...
  • Bug Robot

  • This robot counts with a multiplataform PCB that allow the programming to be done with Arduino Uno R3 or with STM32 Nucleo. An Ulstrasonic Range measurement module was mounted in a 9g servo to be possible to detect obstacles in front, left or right of...
  • Recore and PrintrBot Mixtures

  • The PrintrBot is done at about 19" * 6" j* 6" for now. I have moved to another build of sorts w/ the Recore A7 and a Monoprice Maker Select Plus printer. Things are working w/ five steppers, a couple enhancements on the build from the older hardware,...
  • Mini Bartender Robot

  • The Mini Desktop Bartender Robot This easy to use desktop robot automatically unscrews a mini bottle of your choice, pours you a drink, collects bottle caps in an internal cap piggy bank,  and throws bottles to the recycle bin off the side;...
  • STM32G4 Scope

  • Introduction In the past, I have undertaken projects involving portable oscilloscopes with high-speed ADCs (as seen in RPScope). However, in this endeavor, I am committed to streamlining the electronics to the utmost extent and utilizing only the capabilities...
  • Agrofelis Robot

  • Agrofelis Robot Multipurpose Energy-Dense, Implement Carrier Agricultural Robot. A Programmable, AI-Ready Precision Agriculture Base Vehicle. The Problem The convergence of declining demographics, economic disparities, rising energy costs and supply...
  • L.A.S.E.R. Tag Control

  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...
  • LayerOne 2014 Conference Badge

  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...
  • X12 Turtle Beach Headset Hack

  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...
  • X12 Turtle Beach Headset Hack

  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...
  • Christmas Lights Fail

  • Hardware used.  Seeeduino v1.1 Phaktor bought this a few years back, played with it a couple of times but it just sat in his hobby bin ‘til now. Parallax LCD  http://www.digikey.com/product-detail/en/27977/27... bought from RadioShack...