Close

1717 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워레깅스룸┒ Цpassed강남술집정보㎭쓰리아워가격쓰리아워가격╆ ¤강남쓰리아워invite 강남술집정보Ŋ쓰리아워ｈуserious"

  • TJ - $99 Thermal Imager
  • Details     from TJ - $99 Thermal Imager
  • IntroductionThermal Imaging technology used to be priced prohibitively outside the budget of hobbyists until recent years. Late 2012 when I started working on my 1st Thermal Imaging project, the lowest cost thermal camera available on the market was...

  • Intro to Robotics 101
  • Details     from Intro to Robotics 101
  • Credit to serisman for his YABBAS designhttp://www.instructables.com/id/YABBAS-Yet-Another-Bare-Bones-Arduino-on-Stripb/I will be building on this to add good documentation here suitable for anyone else to replicate the course we are creating.

  • Flex Modules
  • Details     from Flex Modules
  • The general goal is to make a 'kit' of reusable components for wearables.Bluetooth BLE is the standard for communications. WiFi, etc. require too much power and anyone with a wearable likely has an Android or iOS phone. All wired connections are USB...

  • USB Hi Power
  • Details     from USB Hi Power
  • This board is part of Fyber Labs Flex Module project.The current design is a TPS62067 driven from a USB 2.0 micro B connector. USB lines are filtered through a TPD4S014 for ESD and high voltage supression. The TPD4S014 also provides a startup delay to...

  • Broke Hackers' Model Railway
  • Details     from Broke Hackers' Model Railway
  • The goal of the project is to create a cheap, simple, open source, automated, 3D printed, connected, DIY model railway system. Here are the details about why can it be useful and how can it help the world. THE STANDARD KIT Since the project is more like...

  • RV Rooftop A/C MPU Replacement
  • Details     from RV Rooftop A/C MPU Replacement
  • Original board removed from A/C. CON on far right of picture is the control box connection. ID, OD, RM, and OA are temperature sensor inputs either inline with it's respective coil (ID & OD) or air temp (RM & OA). Fur OFF/Fur ON and COOL/HP are option...

  • Open Source Analog Effects Pedal
  • Details     from Open Source Analog Effects Pedal
  • Project RequirementsIn order to develop an open standard, a set of requirements must be developed to ensure compatibility of Modules, and prevent scope creep. Requirements can be found on this project's git wiki:https://github.com/Smerfj/OSAEP/wiki/System-RequirementsSystem...

  • GrillUp
  • Details     from GrillUp
  • I want to try, at least partially, to automate the preparation of food on a charcoal grill. When the dish begins burning we pour it with water or beer. Why not replace the human with a pump and a handful of electronic components? Yes, it’s about getting...

  • USB BiPower OTG Flex Module
  • Details     from USB BiPower OTG Flex Module
  • This board is part of Fyber Labs Flex Module project.The current design is a TPS62086 driven from a USB 2.0 micro A/B connector. USB lines are filtered through a ECMF02-2AMX6 and TPD1E05U06DPYT for ESD and a TPD1S514-1YZR for high voltage supression....

  • Nintendo Controller Noise Maker
  • Details     from Nintendo Controller Noise Maker
  • Programming an ATtiny85I made an Arduino shield for programming ATtiny85's.  I'm programming them by loading the Arduino ISP example and compiling/pushing with an Arduino as ISP programmer from the Arduino IDE.  A instrucables project that...

  • BlueBasic: BASIC for Bluetooth
  • Details     from BlueBasic: BASIC for Bluetooth
  • IntroductionBlue Basic is a heavily modified port of the TinyBasic interpreter developed to run on the Texas Instruments CC2540 and CC2541 Bluetooth LE chips (BLE) (see http://www.ti.com/product/CC2540 and http://www.ti.com/product/CC2541).MotivationIf...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday