Close

19029 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Peltier Cloud Chamber
  • Details     from Peltier Cloud Chamber
  • Short demo video: ---------- more ---------- For this I took a single TEC2-25408 Peltier element, which sits on a Thermalright Peerless Assassin 120 CPU air cooler. On the cold side of the Peltier sits a 100 x 100 x 2mm copper plate into which I drilled...

  • Open-Source 6-Axis Robotic Arm

  • Details     from Open-Source 6-Axis Robotic Arm
  • In some ways, this arm is pretty simple: it's just a bunch of joints driven by stepper motors. The basic design directly follows the PUMA architecture, and everything follows from there. There's just a lot of slow design work figuring out how to squeeze...

  • Kub Kar Timer
  • Details     from Kub Kar Timer
  • This track is a 3 lane version; however this design should work fine with minor modifications for up to 6 lanes (6 analog pins on the ATMega48).Each track has a 4x 7 segment display, each of which is driven using a 74595 shift register (each one chained...

  • Model Rocket Data Logger
  • Details     from Model Rocket Data Logger
  • Electronics/HardwareAn ATMega328 microcontroller, with Arduino software, handles the communication between the different devices:MPU6050 AccelerometerBMP180 AltimeterSD Card ReaderRadio TransmitterNot represented in the above diagram are the two LEDs:...

  • 'Thor' robot with addons and GUI
  • Details     from 'Thor' robot with addons and GUI
  • This project is based on the THOR robotic arm project from AngelLM and will be a version with lots of add-ons and especially modified for a wide range of 3D printers with a smaller print area.Also it is my intention to improve a lot of things to the...

  • Make old home alarm great again
  • Details     from Make old home alarm great again
  • My home alarm provider have retired all products they made before 2018 in favor of their new lineup. They now push hard for "upgrading" to their new system, to which of course no sensors of previous generation are compatible, so you have to buy everything...

  • Freeside Atlanta
  • Details     from Freeside Atlanta
  • Freeside Atlanta (est. 2009) is a nonprofit work space built entirely by volunteers. We are a community of makers, tinkerers, engineers, programmers, artists, teachers, and lunatics. As a community, we have built out our space with tools and equipment...

  • Poor-Students Electronic Bench
  • Details     from Poor-Students Electronic Bench
  • I thought i should get the ball rolling and post up the outline of the project however I don't expect frequent updates to be posted for about two weeks after this date (20/06/2014) but after that i should have a large amount of time to devote to the...

  • Bay Area Maker Faire After Party
  • Details     from Bay Area Maker Faire After Party
  • Seeing everything at Bay Area Maker Faire means a lot of time on your feet. By the end of the day the Hackaday Crew is ready to take a load off and toss back a tasty beverage. We invite you to join us on Saturday, May 16th starting at 7pm. All the cool...

  • Altzhiemer Mitigator
  • Details     from Altzhiemer Mitigator
  • This is a method to mitigate the symptoms of Alzheimers disease by constant repetition. The more the patient plays a family introduction video the more they tend to remember family names, pets, devices, care-givers, and dangers. All you need to do is...

  • WiFi controlled RC Car
  • Details     from WiFi controlled RC Car
  • As shown in block diagram, everything is controlled by a wireless router, the webcam is connected to the wireless router via USB port that allows live streaming video, the motor controller board is connected directly to the router via GPIO in order to...

  • Yet Another Pi Zero USB Hub
  • Details     from Yet Another Pi Zero USB Hub
  • This USB hub is meant to stack on the bottom of the Pi Zero. It provides 3 USB ports, audio output, and a power supply from a 12V wall wart.This is not a product and it never will be; it's something I've designed to be as small and as capable as possible....

  • DIY Leslie/Vibratone cabinet
  • Details     from DIY Leslie/Vibratone cabinet
  • Even if it’s possible to build everything from scratch, including the rotor (like this, or this), I started from original parts of a Leslie 760, the motor stack (a fast and a slow motor driving the same wheel), the Styrofoam rotor and its assembly.The...

  • colour slitscan
  • Details     from colour slitscan
  • ok 6+ months later ran into to many walls with the Ths1206 & moved to 3x lts2315-12 serial adc which made everything work better .. & had significant success (see pictures ...)though due to the much lowered sensitivity of the sensor-- i am a bit disappointed...

  • MK01 PALMTOP
  • Details     from MK01 PALMTOP
  • The MK01 features a 3D printed dovetail jointed snap together case, low res 4.3" tft composite backup monitor, 2cell 7.4 volt LiPo battery, 5 volt stepping voltage regulator from China that powers the whole thing, a random USB hub circuit removed from...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday