Close

914 Results for "solder fume extractor"

  • denhac

  • Our Mission: To create and sustain a local, community driven, shared space, that enables education, experimentation, and collaboration, by applying the spirit of DIY to science, technology, engineering, and art.Denhac is an IRS designated 501(c)(3) charitable...
  • Mini Selective solder machine

  •    With increases in PCB complexity and component densities, selective soldering is a popular technique for mixed technology PCB boards containing a small number of through hole joints or components.  You can use a selective solder machine...
  • $150 Pick and Place Machine*

  • (Skip to 2:50 to see it in action!) A Highly Specialized Pick & Place Machine First, some prerequisites: Your board must fit within the print area, with about 3" to spare in each directionYour board must only have 1-2 BoM itemsSingle-sided assembly onlyThese...
  • Data-To-SD

  • No components needed to solder on (Except the wires you solder on the pins) Has 2 layers needed to be printed (Top & Bottem)
  • 0802 LCD I2C Adapter

  • Instructions Place the display face down.Insert 2 x 7 header pins into positions 1-14, short end first. DO NOT SOLDER. On 16 pin displays, leave 15 & 16 open.Insert 2 single header pins into position A and K, short end first. DO NOT SOLDER.Place the...
  • ESP-12 (ESP8266) Pogo Jig

  • BOM -2 x cheap "esp-12 adapter" white boards16 x pogo pinspin headersa piece of FR4 one-sided boarddouble-sided proto board (off the shelf part)kapton tapeSteps to create -First board:desolder the resistors on the bottom of the boardstick kapton tape...
  • RGB LED Strip Controller Circuit

  • ➢Step descriptions: ✦Step 1:-Prepare all the part need in this videos: 8050 transistor X3, 220uF capacitor 8*10mm X3, 10k resistor 0.5W X3, RGB strip DC 12V X1 and Some wire jumpers ✦Step 2: -Solder all the transistors, capacitors and resistors...
  • DIY a LED Christmas Tree

  • ➢Step descriptions: ✦Step 1:-Let's start soldering. We solder the SMD resistors first. They are really too small. ✦Step 2:-Then we solder interface of the TransFLash , there are a lot of pins, so we apply tin on the solder joint first. ✦Step 3:-OK,...
  • Blue DEF CON 26 badge

  • The hardest part was finding solder in Las Vegas during DEF CON! Fry's was completely out! As they were of 5-volt power supplies, fine gauge wire, connectors, certain USB cables, etc. I finally found some at Lowes. BTW, only 2 people noticed. Sigh......