Close

4366 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㏃ ∨acting강남쓰리아워㎲쓰리아워가격쓰리아워ご㈃쓰리아워lent 쓰리아워가격チ쓰리아워가격●㎫affectionate"

  • Whitestar

  • Details     from Whitestar
  • The whitestar project is my attempt at building a reliable and fully automatic wardriving equipment for permanent installation in my car. It's used to constantly gather 802.11 data for research purposes and contribution to the https://wigle.net crowdsourced...

  • Arduino Line Follower Robot
  • Details     from Arduino Line Follower Robot
  • COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...

  • MC68000 Computer
  • Details     from MC68000 Computer
  • This project is a homebrew computer based on the Motorola 68000 CPU. Design includes four megabytes of RAM, 128kB of ROM, Something for video, two serial ports at 9600 baud, and eventually networking and a hard disk.The purpose of this computer is two-fold:...

  • "Chad" - The NFC Voting System
  • Details     from "Chad" - The NFC Voting System
  • The OriginsWhen we decided to throw a party in LA (which became know as The Gathering) I wanted it to be more than just free t-shirts and beer. Laser Graffiti popped to mind and I was glad that Ben was willing to take the lead on that project....

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • AltSoftSerial Arduino Library
  • Details     from AltSoftSerial Arduino Library
  • Arduino's SoftwareSerial library, based on NewSoftSerial by Mikal Hart, works pretty well for simple projects hwere you only do one thing at a time.  But it keeps interrupts disabled during the entire byte plus start and stop bits.  For reception,...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • BareDuino Nano
  • Details     from BareDuino Nano
  • Since I’m on a student budget, I couldn’t afford to leave an actual Arduino into my projects, so I designed, etched and assembled the BareDuino classic. I can quickly throw one into a project without having to worry about using an expensive regular Arduino.Using...

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday