Close

4366 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • AltSoftSerial Arduino Library
  • Details     from AltSoftSerial Arduino Library
  • Arduino's SoftwareSerial library, based on NewSoftSerial by Mikal Hart, works pretty well for simple projects hwere you only do one thing at a time.  But it keeps interrupts disabled during the entire byte plus start and stop bits.  For reception,...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • BareDuino Nano
  • Details     from BareDuino Nano
  • Since I’m on a student budget, I couldn’t afford to leave an actual Arduino into my projects, so I designed, etched and assembled the BareDuino classic. I can quickly throw one into a project without having to worry about using an expensive regular Arduino.Using...

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...

  • HydraBus v1 Rev1.5
  • Details     from HydraBus v1 Rev1.5
  • HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...

  • Network Amplifier
  • Details     from Network Amplifier
  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...

  • Toy Claw Machine
  • Details     from Toy Claw Machine
  • The idea behind this project was for my sons birthday party. He wanted a robot themed party, so I figured this would be the easiest to build. Similar to the commercial claw machines, the idea is to grab a toy and successfully get it transferred over...

  • Speed up pkgsrc on retrocomputers
  • Details     from Speed up pkgsrc on retrocomputers
  • This HOW-TO explains a quick and easy way to speed up NetBSD pkgsrc compiling on retrocomputers. It was written because there are altogether too many distcc how-tos which are complex, require special build environments or make assumptions without explaining...

  • OCXO Sensitivity Measurement
  • Details     from OCXO Sensitivity Measurement
  • For my GPSDO project I’ve opted for a Piezo 2940210 VCOCXO at 10 Mhz. There is a dearth of information on this particular module available online.(A notation notation: I utilize “E” notation to indicate orders of magnitude; thus 1.5E-6...

  • OpenXHC
  • Details     from OpenXHC
  • Features:STM32F10x controller with hardware USB 2.0 FSRotary encoder ( quadrature output )Rotary switch ( 7 position )Switch buttonNOKIA 5110 LCD 84x48 [PCD8544]1.8' TFT 128x160 [ST7735R]EastRising ERC12864-4 COG LCD 128x64 [ST7565R]20x4 LCD [HD44780]Matrix...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday