Close

4366 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격ㅱ ╈proprietary８셔츠룸후기셔츠룸추천ヰamidst 선릉셔츠룸셔츠룸추천 셔츠룸추천※셔츠룸추천ㄴhandle㏉"

  • Recore and PrintrBot Mixtures
  • Details     from Recore and PrintrBot Mixtures
  • The PrintrBot is done at about 19" * 6" j* 6" for now. I have moved to another build of sorts w/ the Recore A7 and a Monoprice Maker Select Plus printer. Things are working w/ five steppers, a couple enhancements on the build from the older hardware,...

  • STM32G4 Scope
  • Details     from STM32G4 Scope
  • Introduction In the past, I have undertaken projects involving portable oscilloscopes with high-speed ADCs (as seen in RPScope). However, in this endeavor, I am committed to streamlining the electronics to the utmost extent and utilizing only the capabilities...

  • MC68000 Computer
  • Details     from MC68000 Computer
  • This project is a homebrew computer based on the Motorola 68000 CPU. Design includes four megabytes of RAM, 128kB of ROM, Something for video, two serial ports at 9600 baud, and eventually networking and a hard disk.The purpose of this computer is two-fold:...

  • "Chad" - The NFC Voting System
  • Details     from "Chad" - The NFC Voting System
  • The OriginsWhen we decided to throw a party in LA (which became know as The Gathering) I wanted it to be more than just free t-shirts and beer. Laser Graffiti popped to mind and I was glad that Ben was willing to take the lead on that project....

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • AltSoftSerial Arduino Library
  • Details     from AltSoftSerial Arduino Library
  • Arduino's SoftwareSerial library, based on NewSoftSerial by Mikal Hart, works pretty well for simple projects hwere you only do one thing at a time.  But it keeps interrupts disabled during the entire byte plus start and stop bits.  For reception,...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • BareDuino Nano
  • Details     from BareDuino Nano
  • Since I’m on a student budget, I couldn’t afford to leave an actual Arduino into my projects, so I designed, etched and assembled the BareDuino classic. I can quickly throw one into a project without having to worry about using an expensive regular Arduino.Using...

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...

  • HydraBus v1 Rev1.5
  • Details     from HydraBus v1 Rev1.5
  • HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...

  • Network Amplifier
  • Details     from Network Amplifier
  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday