The whitestar project is my attempt at building a reliable and fully automatic wardriving equipment for permanent installation in my car. It's used to constantly gather 802.11 data for research purposes and contribution to the https://wigle.net crowdsourced...
DNS-320L NAS Table of Contents 1. Intro2. Hardware 2.0.1. Weltrend WT69P32.0.2. JP2 connector 3. Bootloader4. Original firmware5. Building mainline Linux kernel6. Building a rootfs7. Bootloader setup8. References 1 Intro The D-Link DNS-320L is a simple...
Links to project details (GIT, Wiki, Docs) are on the left. The laziest intro to this project is the 2-minuite video created for THP Quarterfinals (i.e. the first video I made):Or even better, see my full 5-min final video (there is also the semifinal...
The OriginsWhen we decided to throw a party in LA (which became know as The Gathering) I wanted it to be more than just free t-shirts and beer. Laser Graffiti popped to mind and I was glad that Ben was willing to take the lead on that project....
STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) ) I have still continued the STM32 build...
I've wanted to build my own amp for quite a while. For bass guitar, the selection of amplifiers you can buy is pretty lack-luster, and mid-volume studio amps are hard to find. It seems like most of what's available is either a practice amp or a stadium...
I picked up the vacuum system from Portland State two weeks ago from a professor I know. It was too big for the little things they do and by the time it warms up and pumps down there is no time left. So they decided to get rid of this system and build...
IntroductionVaporization is done by off-the-shelf ultrasonic atomizers, either really cheap ones (the black ones in the picture below, 2.50 $ each) or some more rigid ones (the silver one, a Fogstar 300, 290 € each), air is moved by an array of...
The idea behind this project was for my sons birthday party. He wanted a robot themed party, so I figured this would be the easiest to build. Similar to the commercial claw machines, the idea is to grab a toy and successfully get it transferred over...
Think of this tablet as not as some toy, but as a computer in whole. This Tablet is designed to be Modular by using USB as the main communications line. Though it is a modified version of USB so that way any one attachable card can be a power source,...
We can use the FPGA to do fast numerical integration to solve differential equation models of neurons. This page describes a couple of neuron models and their solution by DDA techniques. Eugene Izhikevich developed a simple, semiempirical, model of cortical...
piculearThis incomplete but slowly progressing project has the ultimate goal of producing a reliable PIC ICSP programmer that just works and can be more readily picked apart, examined, and/or replaced than a comparable Microchip programmer (for instance,...
This page describes a prototype board for the Atmel Mega644 or Mega32 (PDIP) MCU. It includes a power supply, crystal clock, and generous bypass capacitors. A six-pin header allows flash memory programming from an STK500 or AVRISPmkII. All port pins...
QUUB is an open-source, micro controller system based on a core processor, addressable daughter boards, and remote IO modules. It is a general-purpose embedded microprocessor system, the form factor is based on a main MCU board and multiple stacked...
Features Supports 3/4 lane MIPI DSI displays.DSI controller supports resolutions of up to 1080x1920 at 60 Hz refresh rate.Converts HDMI video to DSI - letting you connect any MIPI DSI screen to your PC, Raspi or similar devices. Conversion works up to...