Technical specsThis breakout board targets the v3.x series of the Arduino Nano (and compatible clones), while trying to be usable with other boards like the Pro Micro and v2.x series of the Nano. It makes available Serial (TX/RX) line, Digital, Analog,...
When my station isn't in a radio silence and doing really Recon passively and connect my wire or buy 5G or Wi-Fi it will have access to my personally trained large language model, convolutional neural network, with several additional modules and an agent...
Please check out the Github for all future updates: https://github.com/lambdamikel/picoram6116 A follow-up to my 2114 SRAM Emulator. This time I am targeting the 6116 SRAM chip - full 2 KBs and a serious CPU at full speed (i.e., Z80 @ 1.8...
Summary of Intentions I have an equatorial mount (Bresser Exos-2 which is similar to EQ5 ) without any tracker or GOTO device. I enjoy looking for celestial objects by myself. But handling the telescope becomes a bit hard on my back after several hours...
The whole structure necessary to sustain the 24 tentacles and host the just as many servomotors (each one equipped with an arm screwed on the small shaft using the provided screws), and the electronic boards (i.e. the frame…) has been designed using...
Here some projects with KeyDuino: NFC car doors control NFC infinity tableNFC drawer lock If you want one, the nano is at 25$ and the Normal at 30$. and if you have any idea of NFC projects please feel free to share them here or in...
Here some projects with KeyDuino: NFC car doors control NFC infinity tableNFC drawer lock If you want one, the nano is at 25$ and the Normal at 30$. and if you have any idea of NFC projects please feel free to share them here or in...
In this project, you will need the following: HARDWARE COMPONENTS: gen4-IoD-32T10-way FFC CablemicroSD CardmicroUSB Cable4D-UPA Adaptor Board SOFTWARE COMPONENTS: Workshop4 IDEArduino IDE For more information please go to this link
We often want to perform remote actuation of several actuators such as lamps, motors, and other actuators. However, there are cases where the use of wired systems to drive these actuators becomes impracticable due to the distance between the actuator...
IntroductionThis is a simple BotSpine demo project. BotSpine already has a processor and display. A CR2032 battery will supply the power. The controllers to move the paddles up and down will simply be wires. So, I'll have to solder a few wires to the...
Project OverviewGoalTo design and build the more most open, expressive and responsive wind controller out there with an open source hardware/software toolchain, no more and no less.System DesignProject Video The voice may sound a bit funny as we had...
Hardware IntroductionThe CAT-644, is a simple computer using a 20 MHz ATMega644 microcontroller as its CPU. I am using the DIP-40 package, making it breadboard and hobbyist friendly. Large sections of this project can be built and run entirely...
Control the classic General Instrument SP0256-AL2 speech chip and AY-3-8910 sound generator with a Raspberry Pi and this Python library. The SP0256-AL2 was originally available in the early 1980s in speech add-ons for the VIC-20, Atari 8-bit computers,...
At present PDP-11 computer systems are mostly forgotten, but there are PDP-11 compatible Soviet microprocessors still available on eBay (never used "new old stock") as KR1801VM2 (КР1801ВМ2 in Russian) and I'm going to bring PDP-11 of...
Another project using the 8042 Now that the 8042 clock project has been published, I'm publishing another project based on the same hardware. As I stated, the board can be turned to many uses. This one posed some interesting design problems. I was able...