There's a lot of small detailed steps to this setup, but most are common things you'd be doing with each component individually.. ie: setting up Linux on the beaglebone.. connecting solar to batteries, through the charge controller. This is all basic...
Mooltipass is composed of one main device and a smartcard.On the device are stored your AES-256 encrypted passwords. The smartcard is a read protected EEPROM that needs a PIN code to unlock its contents (AES-256 key + a few websites credentials). As...
This Project is to add a 2 watt laser module to the WaterColorBot.The Lasers power and controls go through a arduino.The laser will activated by a micro switch which is under the holder (the holder is where the laser and heatsink will be mounted)
This project seeks to emulate the capabilities of commercial products like: http://www.amazon.com/Breville-BTM800XL-One-Touch-... but for less than $300 and with more features and modability. As someone with little (read 'no') electronics experience...
The Smart Poi: uses the accelerometer in many ways. One way is to translate the sensor data into RGB LED values, printing the colors into corresponding points in the rotational arc. Wirelessly the accelerometer data is transmitted to a computer using...
The idea is to make a smart lamp that can dim and switch five sets of leds, and one 230v dimmable bulb. The microcontroller detects the phase of the ac after the transformer. This will be used for both the dimming of the ac bulb. It will also...
I've wanted to build my own amp for quite a while. For bass guitar, the selection of amplifiers you can buy is pretty lack-luster, and mid-volume studio amps are hard to find. It seems like most of what's available is either a practice amp or a stadium...
I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...
I picked up the vacuum system from Portland State two weeks ago from a professor I know. It was too big for the little things they do and by the time it warms up and pumps down there is no time left. So they decided to get rid of this system and build...
In the original configuration, the airswimmer is propelled by the tail fin, which can be flapped left-to-right using the remote. The whole fish can also be tilted up or down by moving the gondola, which holds the battery and receiver, forward and back...
IntroductionVaporization is done by off-the-shelf ultrasonic atomizers, either really cheap ones (the black ones in the picture below, 2.50 $ each) or some more rigid ones (the silver one, a Fogstar 300, 290 € each), air is moved by an array of...
For my GPSDO project I’ve opted for a Piezo 2940210 VCOCXO at 10 Mhz. There is a dearth of information on this particular module available online.(A notation notation: I utilize “E” notation to indicate orders of magnitude; thus 1.5E-6...
[Intro] {Updated 2/25/2016}VisualK-OS collectively refers my custom-built system of lighting devices, intended for use with my band's (Saturn's Iris) live shows. To date, the system consists of: The main control center, Thor and the Flood Bank Array...