Close

5848 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격Н 쓰리아워relief강남쓰리아워쓰리아워가격강남쓰리아워distributing 쓰리아워레깅스룸ⅰ㉤강남술집정보hurry"

  • The Companion Light v1.5
  • Details     from The Companion Light v1.5
  • CONTEXT After creating v1.0 of the Companion Light (check it out: https://hackaday.io/project/194589-the-companion-light-v10), it seemed that I was able to reach a wider audience for the project. Successful indeed! Now, with the upgrades planned and...

  • Isolation Monitoring Device
  • Details     from Isolation Monitoring Device
  • Leakage control is very important in this vehicle, which operates with a nominal 48V BLDC motor. The insulation control on this electronic card is provided by coding it with the STM32F103C8T6 microprocessor. This card, which works with the logic of...

  • OBD2 CAN PIC16F876A
  • Details     from OBD2 CAN PIC16F876A
  • TFT screen is 160x128 pixels, 1.8 inch with ST7735 driver.The MCP2515 module drives the CAN BUS. The circuit supply is from the car 12V , 5V regulator generates the 5V for the TFT and MCP2515. Setting up filters in the MCP2515 is for allowing only 7DF...

  • Controlling A/C abuse
  • Details     from Controlling A/C abuse
  • My plan: Log electricity consumption.Place an IR sensor so I can know when the apartment is habited.Record temperatureControl the air conditioning The first three are easy. I just built a Node... I call "Node"  to an ESP8266 + PS + anything_else...

  • Luminous Katana
  • Details     from Luminous Katana
  • ## Video## StructureThe katana has modules of a blade and a grip.The blade module consists of blade shells, a shaft, and a LED tape. The shells are made with a 3D printer and glued. The shaft prevents the blade module from bending. The LED tape is a...

  • AidaToSerial
  • Details     from AidaToSerial
  • I first made a terminal program which was working fine and then decided to create a UI so it is easier to manage and for users to change settings according to their needs without having to get in the code.So the Windows app is designed to be adaptable,...

  • PDP-8/V
  • Details     from PDP-8/V
  • Source code breakdown...asm - pdp8 assembler (allows long labels) and linkercc,ctrl - left-overs from hode, no pdp-8 stuffde0 - out-of-date DE0 FPGA implementationdriver - autoboardtest, raspictl programs that run on PC,RasPI to control the tubesfilesys...

  • SIM900A GSM Module & Arduino.
  • Details     from SIM900A GSM Module & Arduino.
  • Introduction. If you love DIY electronics, you’ve probably heard about Arduino. It’s a fun and simple way to get into robotics and programming. But did you know you can also use it to send text messages and make phone calls? That’s right! With a little...

  • DIY Internet Radio
  • Details     from DIY Internet Radio
  • What is it? This is a fully working Internet Radio with which you will be able to listen to Internet radio stations from all over the world. I will give you the instructions on how to build that DIY Internet Radio Based on ESP32 Microcontroller (Firmware...

  • DIY psychrometer
  • Details     from DIY psychrometer
  • Introduction Maintaining humidity at home is very important for the health. Too low humidity can cause dryness of the throat, nose, and skin, which can lead to health problems such as an increased susceptibility to colds and nosebleeds. On the other...

  • Recording Power Supply
  • Details     from Recording Power Supply
  • Disclaimer:  This device is not an accurate measuring device and is intended to estimate the current consumption of the load in dynamics. The measurement error may vary within 1-2 discrete units. And please excuse my English (I am from Ukraine and...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday