Things used in this project: Hardware components Arduino Nicla Sense ME×1Bosch BHI260 sensor Software apps and online services Neuton Tiny MLArduino IDE Intro Despite the incredible variety of wearable devices today, most of the AI features come...
Step 1In this, the Arduino is controlling some relay switches which in turn controls the appliances and the Arduino is controlled by certain programs that we will discuss later on.For this, you will need some prebuilt boards including the Arduino(i am...
For my Lego Optics Lab I have so far built a beam splitter, and a small lens holder. Among the lenses I salvaged from the computer projector was a larger double concave lens. I decided to use the same lens holder design for the concave lens that I built...
I’ll demonstrate how I built a worm drive panoramic mount out of Lego for your various Lego optics lab lens and filter holders. Some folks might find that the worm drive allows a bit more fine tuning for the rotation of the lens or mirror mounted on...
I’ll demonstrate how I built a worm drive pan/tilt mount out of Lego for your various Lego optics lab lens and filter holders. Some folks might find that the worm drive allows a bit more fine tuning for the rotation and tilt of the lens or mirror mounted...
Serial port access is critically important in my role as an embedded software engineer. This is true no matter what operating system I am using and whether it is on a physical or virtual platform. My main operating system is Windows XP, but many projects...
This board was created about 3 years ago, and was going to be productised but never made it. So I'm finally releasing it into the wild.Board overview The XCACDV3, CPLDuino is a single board solution to meld Atmels ATmega 328 RISC microcontroller with...
I’ll demonstrate how I built a very simple panoramic mount out of Lego for your various Lego optics lab lens and filter holders.Follow me on Twitter: @SteveSchuler20.Parts needed1 Lego turntable 4 X 42 Lego Beams 1 X 4Here’s how I built my Lego simple...
I’ll demonstrate how I built upon my Lego simple panoramic mount to create a simple pan/tilt mount for your various Lego optics lab lenses and filter holders.Follow me on Twitter: @SteveSchuler20.Parts needed1 Lego Turntable 4 X 42 Lego Beams 1 X 4 2...
IoT Magical Wand Introduction During our childhood days, we would have fantasized to perform magic using the wand in the hand of a magician. When the magician rotates the wand and says 'Abracadabra', magic happens!...
NOBBLE HAS STEPPED UP TO THE CHALLENGE! ( ͠° ͜ʖ ͡°) Alright folks, benheck doesn't give a hack anymore. Now is the time for us in the modding community to RISE UP by blowing the minds of unknowingly innocent normies with our next level...
For the 2016 Hackaday Prize, I've decided to incorporate this project into a much larger set of projects that altogether I call my Lego Optics Lab. The following are all the various parts an projects that are included:This project (the one you're looking...
So here we will be discussing the main components used and then working of the whole project and more stuff in detail. The main component of this project is microcontroller ATTINY85 and MPU6050 - the Gyro/accelerometer sensor. Then we have other components...
Creating & Deploying the Edge Impulse Model To create an impulse function, add an Image processing block with a 48x48 image size. Use transfer learning to fine-tune a pre-trained image classification model on your data and save the impulse. Set...
First posted to TekScopes at groups.ioThe 5D10 Waveform Digitizer plugin, essentially a 1MS/s DSO, gets some credit for keeping the 5000 series oscopes interesting[1]. While a 5D10 can digitize one or two channels from another plugin, only...