9536 Results for "《 예약문의 OIO↗8489↗8306》가라오케ㅒ청담가라오케sweepご강남가라오케선릉가라오케청담가라오케conviction 가라오케㈛선릉가라오케㎹ㄻ가라오케추천cab"

Crane Game
Details from Crane Game
I will use some variant of Arduino as my controller. Last year I prototyped my projects on Uno and produced using Arduino Pro Mini to save cost. I'm likely to build this on a 6 foot table/stand with 4 to 6 cranes. I think this might be simple enough...

DSP on 8-bit microcontroller
Details from DSP on 8-bit microcontroller
One of the most demanding applications for fast arithmetic is digital flitering. Atmel application note AVR201 shows how to use the hardware multiplier to make a multiply-and-accumulate operation (MAC). The MAC is the basis for computing the sum of terms...

8 Bit minicomputer based on 74-series logic
Details from 8 Bit minicomputer based on 74-series logic
At the moment I am still working on some aspects of the design but so far what I've got is: An 8-bit ALU with 4 general purpose registers and an FLAGS register containing both the conditional and carry flags. Two of these registers and the flags register...

Internet Enabled Multizone Thermostat
Details from Internet Enabled Multizone Thermostat
IntroductionAt the head of the setup is a router that provides internet access for the system. The first node is comprised of a chipKIT Max32, Max32 Ethernet Shield and XBee Shield (developed PCB). The second node is the Wireless Thermostat that is responsible...

NTSC Video on Atmel Mega644/1284
Details from NTSC Video on Atmel Mega644/1284
Video GenerationThere are several very good references for understanding how TVs are controlled by a pulse sequence. I particularly liked the Stanford EE281 Handout #7 entitled "TV paint". Also very useful were Software generated video, by Rickard Gunée,...

The Quub
Details from The Quub
QUUB is an open-source, micro controller system based on a core processor, addressable daughter boards, and remote IO modules. It is a general-purpose embedded microprocessor system, the form factor is based on a main MCU board and multiple stacked...

100w LED projector conversion
Details from 100w LED projector conversion
This project started some months back. I was given two projectors, one with a bulb, one without. Not wanting to scrap either unit, equally not wanting to spend £100 on a bulb that would be prone to shock and likely to fail, I decided a more serious...

MIPI DSI Display Shield/HDMI Adapter
Details from MIPI DSI Display Shield/HDMI Adapter
Features Supports 3/4 lane MIPI DSI displays.DSI controller supports resolutions of up to 1080x1920 at 60 Hz refresh rate.Converts HDMI video to DSI - letting you connect any MIPI DSI screen to your PC, Raspi or similar devices. Conversion works up to...

EEG-Controlled Music with the RPi
Details from EEG-Controlled Music with the RPi
Last year I bought an EEG headset (the Mindwave Mobile) to play with my Raspberry Pi and then ended up putting it down for a while. Luckily, this semester I started doing some more machine learning and decided to try it back out. I thought it might be...

USB DAC with amplifier
Details from USB DAC with amplifier
USB InterfaceThe USB interface is all done by the PCM2705 IC. When the DAC is connected to a computer it recognizes it as a USB sound card and no manual installation of drivers is need. The DAC can control playback on the computer with the following...

Hakkedpad
Details from Hakkedpad
The launchpad is an array of 80 buttons, and 160 LEDs, two per key. It's not touch sensitive, but all the same ... There are five 74HC164, and three 74HC165 inside. 164s (serial to parallel) drive the LEDs, and 165s read the state of the keys. The matrix...

GLOROLL
Details from GLOROLL
2015 : 1 x GloRoll. A 8' diameter steel and LED lit sphere that you can climb into. Think "atlas spheres" from American Gladiators, or if you don't want to youtube it, a metal -human sized- hamster ball.Now, not just a few glow bits, 1024 RGB Leds (yes,...

LED VEST
Details from LED VEST
OVERVIEWUsing 470 WS2811 LED strips, and a Teensy 3.0 to drive the lights. Currently playing pre-rendered animations generated in Processing (for the plasma animations) and a C# app that extract video data and compiled it into LED data. .VEST CONSTRUCTIONThe...

Chainsaw bladed treadmill powered plastic shredder
Details from Chainsaw bladed treadmill powered plastic shredder
Prototype on YoutubeThis project is a work in progress. It uses Chainsaw blade sections wrapped around the original belt drive shaft powered by a cheap $20 craigslist treadmill. Only the frame that houses the motor, belt and belt pully set on top of...

Projector Screen
Details from Projector Screen
It's quiet and fast.It will take 10-40 hours of your life.Your toddler or his friends drawing on it won't ruin your day. This revision has worked flawlessly, with no further adjustment and with daily use, for almost 2 years now.EDIT: 3 houses and almost...

|<
<
2
3
4
5
6
>
>|