Close

6688 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

  • RoomSense IQ
  • Details     from RoomSense IQ
  • Efficient and Delightful Home Automation With RoomSense IQ, inefficiency in homes is no longer a problem, and occupants can enjoy a superior experience. Traditional building automation systems typically rely on schedules to regulate HVAC and lighting...

  • Digital Hourglass
  • Details     from Digital Hourglass
  • Hardware Details This digital hour glass simulates falling sand on a 128x64 OLED screen. An ESP32 drives the system, communicating with both the IMU and OLED via I2C. This is excellent as it means hardware construction involves only 4 nets: VCC, GND,...

  • Coffee Showerhead
  • Details     from Coffee Showerhead
  • UPDATE ================================================================This project occasionally outperformed my MoccaMaster  mostly because of inconsistency in measuring quantities.  I spent the time to dial in the MoccaMaster and it now produces...

  • Programmable Kitchen Island Lamp
  • Details     from Programmable Kitchen Island Lamp
  • Key components The light core, which consists of strips of LEDs stuck to 80/20 extruded aluminum beamsThe finished walnut housing, which holds the diffusers and shapes the lightThe control box, which hides away all the control electronics and is attached...

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • LayerOne 2014 Conference Badge
  • Details     from LayerOne 2014 Conference Badge
  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • windowlicker
  • Details     from windowlicker
  • ideally, this sticks to a window, and measures noise levels through a piezo (contact mic). the other piezo is set up to knock. the rgb is for output. on this prototype, you can use the red LED for visual indicator.detail pictures show the traces running...

  • Photo Light Table
  • Details     from Photo Light Table
  • Notice the PCB colors?  These are from the very early days of Laen's DorkbotPDX group PCB order, before the boards were purple and it became OSH Park.

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...

  • Light Staff
  • Details     from Light Staff
  • This was a project a few months in the making. I originally started it while I was still at SpaceX but really got to focus on it right before burning man 2013. I really wanted an 8 ft long carbon fiber staff with a ton of full bright white capable RGB...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday