Close

7875 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Arduino Line Follower Robot
  • Details     from Arduino Line Follower Robot
  • COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • LayerOne 2014 Conference Badge
  • Details     from LayerOne 2014 Conference Badge
  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...

  • Christmas Lights Fail
  • Details     from Christmas Lights Fail
  • Hardware used.  Seeeduino v1.1 Phaktor bought this a few years back, played with it a couple of times but it just sat in his hobby bin ‘til now. Parallax LCD  http://www.digikey.com/product-detail/en/27977/27... bought from RadioShack...

  • BlindSpot
  • Details     from BlindSpot
  • Keep in mind, for windows 7+ I had to change the friendly names of each web cam so that Processing can address each one consistently. Here is a tutorial: http://www.eightforums.com/customization/15321-tu... Also, here is an Instructable to hack the power...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • windowlicker
  • Details     from windowlicker
  • ideally, this sticks to a window, and measures noise levels through a piezo (contact mic). the other piezo is set up to knock. the rgb is for output. on this prototype, you can use the red LED for visual indicator.detail pictures show the traces running...

  • Wearable computer
  • Details     from Wearable computer
  • This project has several components, each of which might potentially be its own project:1) The modded monocular head-mounted display/goggles2) The haptic glove interface3) The dehumidification mechanism for the goggles4) The software stack for implicit...

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...

  • Tea-Pi
  • Details     from Tea-Pi
  • This project seeks to emulate the capabilities of commercial products like: http://www.amazon.com/Breville-BTM800XL-One-Touch-... but for less than $300 and with more features and modability. As someone with little (read 'no') electronics experience...

  • The Red Alert Alarm Clock
  • Details     from The Red Alert Alarm Clock
  • The Red Alert Alarm features a 3 pronged attack on your unconsciousness. First a 1000W flood light will turn on to help simulate sunlight. Shortly there after a 120db siren will go off for 2-3 seconds. This is enough to scare the bejesus out of a lot...

  • HydraBus v1 Rev1.5
  • Details     from HydraBus v1 Rev1.5
  • HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...

  • Network Amplifier
  • Details     from Network Amplifier
  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday