Close

2084 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

  • Popup Notification Dinosaur
  • Details     from Popup Notification Dinosaur
  • This little fella is designed to grab your attention and alert you to exciting digital events like new subscribers, upvotes or comments. For our mutual delight, I created a video detailing the design, building and testing of this prehistoric print –...

  • RoomSense IQ
  • Details     from RoomSense IQ
  • Efficient and Delightful Home Automation With RoomSense IQ, inefficiency in homes is no longer a problem, and occupants can enjoy a superior experience. Traditional building automation systems typically rely on schedules to regulate HVAC and lighting...

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • Christmas Lights Fail
  • Details     from Christmas Lights Fail
  • Hardware used.  Seeeduino v1.1 Phaktor bought this a few years back, played with it a couple of times but it just sat in his hobby bin ‘til now. Parallax LCD  http://www.digikey.com/product-detail/en/27977/27... bought from RadioShack...

  • BlindSpot
  • Details     from BlindSpot
  • Keep in mind, for windows 7+ I had to change the friendly names of each web cam so that Processing can address each one consistently. Here is a tutorial: http://www.eightforums.com/customization/15321-tu... Also, here is an Instructable to hack the power...

  • Watercolorbot with a laser
  • Details     from Watercolorbot with a laser
  • This Project is to add a 2 watt laser module to the WaterColorBot.The Lasers power and controls go through a arduino.The laser will activated by a micro switch which is under the holder (the holder is where the laser and heatsink will be mounted)

  • HydraBus v1 Rev1.5
  • Details     from HydraBus v1 Rev1.5
  • HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...

  • MeArm - Your Robot
  • Details     from MeArm - Your Robot
  • The MeArm is an Open Sourced Robot Arm. It's small, like pocket sized and that's for a reason. It can be cut entirely from an A4 (or more accurately 300x200mm) sheet of acrylic and built with 4 cheap hobby servos. It's live on our site for about $35...

  • Laser Welder Retrofit
  • Details     from Laser Welder Retrofit
  • So, where I stand now. I ended up using a Mesa 5i25 PCI card and a 7i76 step/dir control card. The Yaskawa servos have pretty good auto tune so I decided to leave the PID loop up to the servo drives.Speaking of servo drives, that and the servo motors...

  • Crane Game
  • Details     from Crane Game
  • I will use some variant of Arduino as my controller. Last year I prototyped my projects on Uno and produced using Arduino Pro Mini to save cost. I'm likely to build this on a 6 foot table/stand with 4 to 6 cranes. I think this might be simple enough...

  • The Quub
  • Details     from The Quub
  • QUUB is an open-source, micro controller system based on a core processor, addressable daughter boards, and remote IO modules. It is a general-purpose embedded microprocessor system, the form factor is based on a main MCU board and multiple stacked...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday