Close

3530 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격Н 쓰리아워relief강남쓰리아워쓰리아워가격강남쓰리아워distributing 쓰리아워레깅스룸ⅰ㉤강남술집정보hurry"

  • RPiLooper
  • Details     from RPiLooper
  • Step 1 - Install Raspbian Start with the Raspbian distro from the raspberrypi.org downloads page:http://downloads.raspberrypi.org/raspbian_latestRaspbian setup instructions: To use an image file, you will need to unzip it and write it to a suitable (2GB...

  • PIC Controlled Time Lapse Camera
  • Details     from PIC Controlled Time Lapse Camera
  • OK, so this one started about 3 years ago. I had an old digital video camera (that also takes stills). Unfortunately the maximum video resolution is 640x480 and stills are taken at 3MP, so not a lot of use by today's standards (my phone can do better). So...

  • Arduino-based Dahlander switch
  • Details     from Arduino-based Dahlander switch
  • Dahlander motor switch replacement© J.N. Simonnet – March 2014Problem statementThis design is intended as a replacement for a 3-position switch doing 0/3000rpm/6000rpm/0 on a Lurem wood machine[1]. This switch is natively equipped with a mechanical...

  • Chameleon
  • Details     from Chameleon
  • The Chameleon Arduino-compatible shield board was designed to support two general application areas: (1) soft-core processors, and (2) intelligent serial communications interface. The board was constructed to be compatible with the form-factor of the...

  • Fourbit
  • Details     from Fourbit
  • Since I was born in mid-eighties, I've never experienced real 74xx build. Few gates here and there was common, but lager designs were practically unneeded - as microcontrollers, CPLDs or FPGAs replaced need for such as work. But my possession in vintage...

  • CV closeloop CNC
  • Details     from CV closeloop CNC
  • With a CNC the main goal is to get a platform to a location. This location can be specified by different coordinate systems. Currently I'm limiting the aim to a 2D plane. Most hobby CNCs use the two drive axis as the basis for the CNC's coordinate system....

  • DIY CPLD board
  • Details     from DIY CPLD board
  • The project will feature a XC9536XL CPLD from Xilinx.A CPLD is basically a simpler version of an FPGA - both are microchips. But what is a CPLD or FPGA for that matter and what makes them different from other microchips (as for example the ATmegas...

  • Custom wide format plotter
  • Details     from Custom wide format plotter
  • Hardware:Our wide format plotter project got off to a flying start late last year (December 2013) with the main printer framework, electronics and most of the custom software completed within the first three weeks.The next month was spent tweaking both...

  • SoMakeIt
  • Details     from SoMakeIt
  • The interests of the current membership focus on subjects of wood- and metal-work, costume design, photography and of course technology (3D printing, microcontrollers (Arduino, etc), robotics, home automation, computers (Raspberry Pi, etc) and programming)....

  • WeMo Garage Door Opener
  • Details     from WeMo Garage Door Opener
  • ****PLEASE NOTE: While this system does nothing more than add an additional “button” to open/close the garage and does nothing to defeat the safety IR Beam on the door, I can’t say for sure whether the system is completely safe as the garage...

  • Arduino Wood Stove Controller
  • Details     from Arduino Wood Stove Controller
  • Current program features: -run a wood stove at a user defined temperature by controlling the stove air damper with a servo-will shut the stove down to a slow burn when the room temperature reaches a user defined setting-incorporates an over temperature...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday