Close

1037 Results for "solder fume extractor"

  • denhac
  • Details     from denhac
  • Our Mission: To create and sustain a local, community driven, shared space, that enables education, experimentation, and collaboration, by applying the spirit of DIY to science, technology, engineering, and art.Denhac is an IRS designated 501(c)(3) charitable...

  • Retro Modules
  • Details     from Retro Modules
  • You don't need much to build a Retro Module. For a host module (e.g. one that will house the main microcontroller board), you can start with a female DE-9 Connector. Your first client module would use a male DE-9 Connector. Modules don't need to be enclosed....

  • Mini Selective solder machine
  • Details     from Mini Selective solder machine
  •    With increases in PCB complexity and component densities, selective soldering is a popular technique for mixed technology PCB boards containing a small number of through hole joints or components.  You can use a selective solder machine...

  • $150 Pick and Place Machine*
  • Details     from $150 Pick and Place Machine*
  • (Skip to 2:50 to see it in action!) A Highly Specialized Pick & Place Machine First, some prerequisites: Your board must fit within the print area, with about 3" to spare in each directionYour board must only have 1-2 BoM itemsSingle-sided assembly onlyThese...

  • 0802 LCD I2C Adapter
  • Details     from 0802 LCD I2C Adapter
  • Instructions Place the display face down.Insert 2 x 7 header pins into positions 1-14, short end first. DO NOT SOLDER. On 16 pin displays, leave 15 & 16 open.Insert 2 single header pins into position A and K, short end first. DO NOT SOLDER.Place the...

  • ESP-12 (ESP8266) Pogo Jig
  • Details     from ESP-12 (ESP8266) Pogo Jig
  • BOM -2 x cheap "esp-12 adapter" white boards16 x pogo pinspin headersa piece of FR4 one-sided boarddouble-sided proto board (off the shelf part)kapton tapeSteps to create -First board:desolder the resistors on the bottom of the boardstick kapton tape...

  • RGB LED Strip Controller Circuit
  • Details     from RGB LED Strip Controller Circuit
  • ➢Step descriptions: ✦Step 1:-Prepare all the part need in this videos: 8050 transistor X3, 220uF capacitor 8*10mm X3, 10k resistor 0.5W X3, RGB strip DC 12V X1 and Some wire jumpers ✦Step 2: -Solder all the transistors, capacitors and resistors...

  • DIY a LED Christmas Tree
  • Details     from DIY a LED Christmas Tree
  • ➢Step descriptions: ✦Step 1:-Let's start soldering. We solder the SMD resistors first. They are really too small. ✦Step 2:-Then we solder interface of the TransFLash , there are a lot of pins, so we apply tin on the solder joint first. ✦Step 3:-OK,...

  • IRM mini
  • Details     from IRM mini
  • Easy extension Solder pads on 4 sides, with both IN and OUT, makes it easy to extend IRM mini into a larger piece of display, whether with wires or just solder them together, it's your choice.SourceThis board is also Open Source!https://gitlab.com/tamctec/irm-mini...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday