Close

6880 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격Ξ 셔츠룸후기brilliant셔츠룸추천셔츠룸가격셔츠룸가격moderate 강남셔츠룸㈚ ⓑ선릉셔츠룸셔츠룸후기vivid"

  • Open Indirect Ophthalmoscope
  • Details     from Open Indirect Ophthalmoscope
  • OverviewCurrently there are over 422 million people worldwide suffering from diabetes. 28.5% of them suffer from Diabetic Retinopathy(1) . 50% of diabetics are unaware about the risk of losing their vision(2). The number of cases of diabetic retinopathy...

  • "Chad" - The NFC Voting System
  • Details     from "Chad" - The NFC Voting System
  • The OriginsWhen we decided to throw a party in LA (which became know as The Gathering) I wanted it to be more than just free t-shirts and beer. Laser Graffiti popped to mind and I was glad that Ben was willing to take the lead on that project....

  • LayerOne 2014 Conference Badge
  • Details     from LayerOne 2014 Conference Badge
  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...

  • Breathing Detection
  • Details     from Breathing Detection
  • Arduino reads voltage from voltage divider with standard 10k resistor and NTC. Breathing causes NTC to change resistance which leads to voltage changes on divider. ATmega328 in Arduino reads voltage with ADC and passes data to LabView function. Function...

  • Supplyframe Design Lab
  • Details     from Supplyframe Design Lab
  • Residency0x03FieldKitFieldKit is an open-source software and hardware platform (environmental sensors, app, and FieldKit.org website) that allows individuals and organizations to collect and share field-based research data, and to tell stories through...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...

  • Light Staff
  • Details     from Light Staff
  • This was a project a few months in the making. I originally started it while I was still at SpaceX but really got to focus on it right before burning man 2013. I really wanted an 8 ft long carbon fiber staff with a ton of full bright white capable RGB...

  • SmartCar
  • Details     from SmartCar
  • My first idea was to use a Nymi band to handle cryptography and comunication but it will take a while to get mine. I'm trying to get in the Developer Program...In the meantime I will use my Pebble (that AFAIK only connect to a phone).

  • Tea-Pi
  • Details     from Tea-Pi
  • This project seeks to emulate the capabilities of commercial products like: http://www.amazon.com/Breville-BTM800XL-One-Touch-... but for less than $300 and with more features and modability. As someone with little (read 'no') electronics experience...

  • The Red Alert Alarm Clock
  • Details     from The Red Alert Alarm Clock
  • The Red Alert Alarm features a 3 pronged attack on your unconsciousness. First a 1000W flood light will turn on to help simulate sunlight. Shortly there after a 120db siren will go off for 2-3 seconds. This is enough to scare the bejesus out of a lot...

  • MeArm - Your Robot
  • Details     from MeArm - Your Robot
  • The MeArm is an Open Sourced Robot Arm. It's small, like pocket sized and that's for a reason. It can be cut entirely from an A4 (or more accurately 300x200mm) sheet of acrylic and built with 4 cheap hobby servos. It's live on our site for about $35...

  • Network Amplifier
  • Details     from Network Amplifier
  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...

  • Laser Welder Retrofit
  • Details     from Laser Welder Retrofit
  • So, where I stand now. I ended up using a Mesa 5i25 PCI card and a 7i76 step/dir control card. The Yaskawa servos have pretty good auto tune so I decided to leave the PID loop up to the servo drives.Speaking of servo drives, that and the servo motors...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday