The whitestar project is my attempt at building a reliable and fully automatic wardriving equipment for permanent installation in my car. It's used to constantly gather 802.11 data for research purposes and contribution to the https://wigle.net crowdsourced...
20200731 : cleanup of many dead links... This page serves 2 purposes : share the resources I have created for all those articles (because http://ygdes.com/sources/ and http://ygdes.com/GHDL/ are not the most convenient) maintain a somewhat not-too-inaccurate...
DNS-320L NAS Table of Contents 1. Intro2. Hardware 2.0.1. Weltrend WT69P32.0.2. JP2 connector 3. Bootloader4. Original firmware5. Building mainline Linux kernel6. Building a rootfs7. Bootloader setup8. References 1 Intro The D-Link DNS-320L is a simple...
COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...
Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...
Residency0x03FieldKitFieldKit is an open-source software and hardware platform (environmental sensors, app, and FieldKit.org website) that allows individuals and organizations to collect and share field-based research data, and to tell stories through...
Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...
The design consists of two servos, mounted in a way in witch one servo pans the other on an x axes, while the other servo tilts a laser on it's y axes. The laser is turned on and off with a transistor, and a camera shutter control is operated by a transistor....
Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...
HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...
I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...
IntroductionVaporization is done by off-the-shelf ultrasonic atomizers, either really cheap ones (the black ones in the picture below, 2.50 $ each) or some more rigid ones (the silver one, a Fogstar 300, 290 € each), air is moved by an array of...
I've been busy with other projects, summer and the day job, but here's an update on the Pinstax. After weeks of perking this project through my brain, I enjoyed some frenzied productivity as ideas came to 3D printed reality. One of the problems...
Design choices:-ATmega 328 μController + DS1307-Supertex HV5812-IN-12 Russian Nixie Tubes-Use of reed switches to allow control while not having buttons showing
The idea behind this project was for my sons birthday party. He wanted a robot themed party, so I figured this would be the easiest to build. Similar to the commercial claw machines, the idea is to grab a toy and successfully get it transferred over...