Close

5686 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Sensor and Actuator board for AUV
  • Details     from Sensor and Actuator board for AUV
  • https://jlcpcb.com/RATAn autonomous submarine is an extremely versatile tool for simple underwater jobs. Many tasks can be executed in a safer way with robots, sparing life and limb of professional divers that once were the only option. This is now exclusive...

  • 74xx Discrete Clock
  • Details     from 74xx Discrete Clock
  • Design Principles: * clock with hours, minutes and seconds display, 24h format* 7-segment display to have the nice 70s/80s charm* everything is driven by a single 1Hz clock* everything runs on 5V* use discrete-logic only - no "hidden" AVR or something...

  • Peltier Cloud Chamber
  • Details     from Peltier Cloud Chamber
  • Short demo video: ---------- more ---------- For this I took a single TEC2-25408 Peltier element, which sits on a Thermalright Peerless Assassin 120 CPU air cooler. On the cold side of the Peltier sits a 100 x 100 x 2mm copper plate into which I drilled...

  • Kub Kar Timer
  • Details     from Kub Kar Timer
  • This track is a 3 lane version; however this design should work fine with minor modifications for up to 6 lanes (6 analog pins on the ATMega48).Each track has a 4x 7 segment display, each of which is driven using a 74595 shift register (each one chained...

  • colour slitscan
  • Details     from colour slitscan
  • ok 6+ months later ran into to many walls with the Ths1206 & moved to 3x lts2315-12 serial adc which made everything work better .. & had significant success (see pictures ...)though due to the much lowered sensitivity of the sensor-- i am a bit disappointed...

  • Not-so-dull free form clock
  • Details     from Not-so-dull free form clock
  • The basic concept is a free form circuit LED array sandwiched between two clear sheets of acrylic with an ESP32 controller. The array consists of two rings of LEDs, the outer ring containing 60 white SMD LEDs for displaying the minutes and the inner...

  • 8BitRobots Module
  • Details     from 8BitRobots Module
  • The 8BitRobots module consists of the following 6 components: HardwareThe Pi Zero is the ideal base for a robot. It's cheap, relatively powerful, runs Linux and comes with WiFi and Bluetooth. Add to it the RoBonnet, my Pi Bonnet which includes PWM outputs...

  • Advanced bench power supply
  • Details     from Advanced bench power supply
  • This is an ongoing longterm project to create dual channel precision bench power supply 2x50W with ultra low output ripple, fully programmable and adjustable from PC. Output channels are independent or connected in series or parallel. It will contain...

  • Christmas tree decoration
  • Details     from Christmas tree decoration
  • Two wires in circular shape form the base of a ball-like object. One of these circles serves as ground the other provides the supply voltage. I built ordinary astable multivibrators. One with 100k and 47uF, the other with 180k and 33uF to have slightly...

  • Do or Donut SAO
  • Details     from Do or Donut SAO
  • From the picture it looks almost done, but far from it! This was just a layout test. I need to redraw everything, make it smaller and find out the arrangement of the LEDs first. Some things have to be fixed in software, as the original layout for...

  • Camping Stereo
  • Details     from Camping Stereo
  • I wanted to make a portable outdoor sound system that actually sounded good, and could be heard.I didn’t think this was much of a hack, I am just connecting off the shelf stuff, but a friend said I should send it to hack-a-day. I go camping(if you can...

  • MakerNet
  • Details     from MakerNet
  • Makernet simplifies electronics projects and makes low-level hardware act more modular and abstracted like software. I want to enable makers -- especially young makers -- to build cool projects with minimal effort.See the concept video below:Everyone...

  • hConsole Cyberdeck
  • Details     from hConsole Cyberdeck
  • This is the hConsole, a portable cyberdeck that you can build yourself, it is hold together using 6 M2 screws and brass inserts and it is powered by a Raspberry Pi 4 model B. This is the complete list of parts to make one yourself: 6xM2 8mm Screws6xM2...

  • RosBot Kossel
  • Details     from RosBot Kossel
  • When I originally designed the printed parts for my RosBot the Vertex's were made to only have one 15/15mm vertical extrusion per corner. Once I started building and had the frame together I noticed there was a lot of twist and wobbliness and not much...

  • Audio VU Meters & Raspberry Pi
  • Details     from Audio VU Meters & Raspberry Pi
  • Story I started building a NAS from my old hard drives and got a Raspberry Pi as server. Then all the wires and everything was just laying around randomly and I thought that I should make a nice case for it. First, I wanted to reuse old hifi equipment...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday