Close

291 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • RosBot Kossel
  • Details     from RosBot Kossel
  • When I originally designed the printed parts for my RosBot the Vertex's were made to only have one 15/15mm vertical extrusion per corner. Once I started building and had the frame together I noticed there was a lot of twist and wobbliness and not much...

  • Ameise
  • Details     from Ameise
  • A clock built with eight authentic soviet vacuum fluorescent display (VFD) tubes, a custom designed circuit board, firmware and 3d-printed case It is an evolution of Phalanx. Many of the firmware improvements made for Ameise also trickled down to Phalanx...

  • Noctiluca
  • Details     from Noctiluca
  • Compared to my Phalanx and Ameise projects, the goal with this project was rather straightforward. Make something similar to Phalanx, but with chonky tubes. IV-12 fits the bill perfectly for this, and is probably the device I ended up using most...

  • Automatic Print Ejector
  • Details     from Automatic Print Ejector
  • Its made entirely from printed parts and things we had laying around. The printer being victimized is an OpenBeam Kossel Pro.MechanicsI started off by quickly designing some linkages in Solidworks. The holes fit some little ball bearings we had laying...

  • Tiny Tank
  • Details     from Tiny Tank
  • Tiny Tank is a small, treaded vehicle, optimized for easy printing and extendability: you can easily design your own components to fit on the tank. The Tiny Tank was developed as part of the Hackster.io 'Power without Boundaries' challenge (https://www.hackster.io/challenges/IDT-Power):...

  • Led Jar
  • Details     from Led Jar
  • Led Jar is a decorative or night lamp powered by a 18650 lithium-ion battery and controlled by ATtiny85 MCU. It uses three independently driven dew drop strings, but all fancy modes (animations) were removed from the code as they were rarely used. Functionality...

  • AnanasStepper 2.0 - 3.0
  • Details     from AnanasStepper 2.0 - 3.0
  • Sorry for the late. Actually, I have a prior agreement with WoW. They invested in the Kickstarter project of Ananas Steper3.0, so they need to agree on when to open source the circuit design and related software. Thank you for all your attention....

  • The Obsium Cyberdeck
  • Details     from The Obsium Cyberdeck
  • DoneSo the new cable arrived and i'm happy to announce that this bad boy is DONE The Obsium Cyberdeck - inside: SBC: Rasbperry pi 400 Battery: 40Wh (4x2.5Ah 18650 in 4S configuration to reach 16.8V max)  Screen: NV125FHM-N41 12.5'' fullHD matrix...

  • qB-deck: remote robot hacking
  • Details     from qB-deck: remote robot hacking
  • Bill of Materials: Jetson Nano (I have the old 4GB model, but 2GB should also do just fine)Waveshare 7.9" display60% Keyboard (I used the Epomaker GK61 with Bananaswitches and Honey-Milk keycaps)Trackball: Perixx PERIPRO-506 USB TrackballPower bank POSUGEAR...

  • MK III Iron Man Suit
  • Details     from MK III Iron Man Suit
  • Build MontagePrinting the HelmetThe helmet model was designed by drumguy560 on the Replica Prop Forums. I did a lot of digging and although this model has been around a while, it still seems to be the community favorite for 3D printing. It also has some...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday