3-11-2024 See these two 2011 Liliputing and TechCrunch articles, which were partly the inspiration for this project: https://liliputing.com/pixel-qi-suggests-low-power-tablets-could-be-powered-by-1w-solar-panels/(6-3-11) https://techcrunch.com/2011/06/04/first-solar-powered-laptop/ (6-4-11)...
Recent achievements:Battery build: Orthophotomaps: Simple mapArea measurementsMap with elevation data Endurance flight: Project: As the name of the project implies, I wanted to come up with a free-to-share UAV concept for a capable plane...
The whitestar project is my attempt at building a reliable and fully automatic wardriving equipment for permanent installation in my car. It's used to constantly gather 802.11 data for research purposes and contribution to the https://wigle.net crowdsourced...
IntroductionWith the intent to build a small plant, I find the necessity to control it. With the whole functions required from a basic SCADA. I think that, a lot of you, with research intent, school, hobby, need to supervise,control and of course acquire...
The arcReactorX is a wearable arc reactor clone which runs on a LiIon Battery from an old cell phone! It has 8 Blue LEDs on the circumfrence and a bright white LED in the centre.Proposed Features: Small and lightPower efficientBrightChange-able modes...
Basic premise:There is a basic gap in services that are provided to the market, this is evident in two ways, firstly, all "home cloud" solutions appear to be not really cloud based at all (as I would see the definition of a cloud based service).The definition...
The modules are rated at 12V/2.5W each. The IC and input caps on these modules can handle up to 50V, so it makes sense to use higher voltage to decrease current and lower resistive losses. PSU delivers 19V nom. at 60W max (=~22 modules, it got overcurrent...
OverviewGoliath is a prototype vehicle for developing large scale quadcopters. The current design is based on a single central gas engine with a belt drive providing power to the four propellers. Control of the vehicle is provided by control vanes placed...
2018 Update After much time and little progress, I am getting back into this project. So here's the long short-version: The plan is to install a touchscreen LCD in my dash in place of the stereo and climate controls. This LCD will be the interface to...
This coffee maker was previously written up on Hackaday, but I thought I should move the project here, as it is ongoing and I have a few updates since this article ran.It may not have been obvious from the article why I made the coffee maker wireless....
MotivationI have four little kids and a full time job, so I don't get out to the apiary as often as I'd like. I keep the hives healthy, but they do occasionally fill up most of their available space with nectar and slow down collection before I can get...
The plan:Sniff for authentication packets (the phones usually start trying to connect before they can actually reliably connect. So this packet can be sniffed out relatively early before they get there (particularly since the wifi antenna will probably...
Project NoahNoah (Network Of Automated Hardware) aims to create an easy to use Open Source Hardware device coupled with some Open Source software that will make it easier to create a home automation system. Paired with a Raspberry Pi the Noah hardware...
For now, CalcHack adds the following hardware:- Complete hardware control over calculator allowing it to be undetectable- Cortex M4 main CPU with Cortex M3 coprocessor- microphone- speaker- 9 axis sensor system (gyro, accelerometer, compass)- 2.4gHz...
Aspects that brought this upPhilosophic:Is there only one way to think about the future? The one with more technology, more devices connected together generating huge amounts of data? Or could we think is the other way round: which is the minimal amount...