Close

2373 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Sensor Overlord
  • Details     from Sensor Overlord
  • Just piling as much as I can into this beast so that I can quickly replicate a project or part of without having to gather everything and wire up.

  • Open-Source 6-Axis Robotic Arm

  • Details     from Open-Source 6-Axis Robotic Arm
  • In some ways, this arm is pretty simple: it's just a bunch of joints driven by stepper motors. The basic design directly follows the PUMA architecture, and everything follows from there. There's just a lot of slow design work figuring out how to squeeze...

  • Nixius
  • Details     from Nixius
  • You can get the detailed bill of materials on github. But basically you will need:4 IN-1 Nixie tubes STM32F051R4T6 ARM Micro DHT22 temperature sensor if you want temperature display 30 FMMTA42 transistors that are used to drive the Nixies - so no special...

  • pockeTETRIS
  • Details     from pockeTETRIS
  • This project originally was meant as a fathers day gift for my tetris-loving father, and I felt like it should be available for others if they want to make a pretty small tetris clone. This was the smallest I could make it with a big enough battery and...

  • Mini 3D printable crossbow
  • Details     from Mini 3D printable crossbow
  • The springs are sections from a spring from an old wind up clock wich had snapped. I use toothpicks as arrows. The wire i used was some I had lying around. The parts are printed with my HE 3D rerprap prusa I3 3D printer. I use a little spring to push...

  • Christmas tree decoration
  • Details     from Christmas tree decoration
  • Two wires in circular shape form the base of a ball-like object. One of these circles serves as ground the other provides the supply voltage. I built ordinary astable multivibrators. One with 100k and 47uF, the other with 180k and 33uF to have slightly...

  • Cetus 3D heated print bed
  • Details     from Cetus 3D heated print bed
  • The idea is quite simple: Stick some resistive wire under the build plate and tap into the 19V power supply of the Cetus to heat it up. I started by drawing some guide lines on the under side of the Cetus' build plate: I then covered everything except...

  • Camping Stereo
  • Details     from Camping Stereo
  • I wanted to make a portable outdoor sound system that actually sounded good, and could be heard.I didn’t think this was much of a hack, I am just connecting off the shelf stuff, but a friend said I should send it to hack-a-day. I go camping(if you can...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday