Close

1577 Results for "%EA%B4%91%EC%A3%BC%EC%98%A4%ED%94%BC%EC%95%88%EB%82%B4%E2%89%A4optime4%E3%80%82com%EA%B4%91%EC%A3%BC%EC%98%A4%ED%94%BC %EA%B4%91%EC%A3%BC%EB%A7%88%EC%82%AC%EC%A7%80 %E2%89%A5 %EA%B4%91%EC%A3%BC%EC%98%A4%ED%94%BC%E1%99%B2 %EA%B4%91%EC%A3%BC%EC%98%A4%ED%94%BC%EC%9C%84%EC%B9%98%E1%99%B2 %EA%B4%91%EC%A3%BC%ED%9C%B4%EA%B2%8C%ED%85%94 %EA%B4%91%EC%A3%BC%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Coil Gun
  • Details     from Coil Gun
  •                                                     Coil Gun WorkingCoil gun consists of a series of conducting coils arranged...

  • PROTO16-I2C
  • Details     from PROTO16-I2C
  • 16-bit Digital I/O cardMCP23017 16-bit I2C I/O ExpanderStrong library support for all major microprocessors for MCP23017I2C Interface - Two Wire InterfaceCan run at 400 KHz or fasterI/O Connector is inexpensive/standard DB-25Fuse protected power...

  • Solar UPS Power Supply
  • Details     from Solar UPS Power Supply
  • Variant V1:The device can be mounted as an add-on panel to any other device panel of at least 110x74 mm size. Soldering side of the device requires 5mm and the components side needs 22 mm of free height. It is also possible to mount the device into Fibox...

  • 3x7 Flip-top Pomodoro Timer
  • Details     from 3x7 Flip-top Pomodoro Timer
  • All the details of the design and how it works are available in my little electronic project's GitHub Repo (it is basically my open lab notebook, with a catalog of many projects now). Here's a demo of it running a 5-minute countdown (I would be...

  • Prosthetic Photographer
  • Details     from Prosthetic Photographer
  • This project is one of three projects of the master thesis: „Experiments on Human-Computer Interaction through electrical body part stimulation“ where each project combines the given hardware and technology of a TENS (transcutaneous electrical...

  • A Cyberdeck for the Masses
  • Details     from A Cyberdeck for the Masses
  • See the Project Description for a fair idea of what's going on here, if it's not already pretty clear. I'm not going to provide a specific set of instructions, components, or files, in those set sections. Instead, one should use the Build Logs, which,...

  • Tiny Solar Energy Module (TSEM)
  • Details     from Tiny Solar Energy Module (TSEM)
  • Ideal for indoor applications The AEM10941 harvesting IC is very suitable for indoor applications because it has an ultra low power startup. The boost converter starts at a very low 380 mV input voltage and 3 uW input power. The IC gets most power out...

  • Tetris in your hands
  • Details     from Tetris in your hands
  • Project developed by Zola Lab - Eduardo Zola - www.zolalab.com.brTetris using Adafruit Neopixel Matrix Since I started with arduino, i always wanted to make a game based on this plataform. So one day I thought, why not create an old classic Tetris ?...

  • QubeCast Max
  • Details     from QubeCast Max
  • A PQ60 standard board looks something like this:The QubeCast Max is a radio board based on a NiceRF RF4463F30 radio module.This module is based on the Silicon Labs Si4463 RF chip. This is an integrated ISM band transceiver IC, normally used...

  • Shop Air Injection Molder
  • Details     from Shop Air Injection Molder
  • The HeaterThe heater design is based on this machine.120v400W~3.33AThe heater unit will be 6" long and 1/2" OD. It will be heated by Nichrome wire ~95" long to provide approx 10 turns of wire per inch of heater. Using a calculator I have come up with...

  • Outdoor Hot tub monitoring
  • Details     from Outdoor Hot tub monitoring
  • I've used a raspberry pi zeri along with a temperature sensor (ds18b20) and a usb wifi dongle. The device reports back the temperature of the spa every 5 minutes to thingspeak, where alarm for low temperature or no incoming data are triggered, and notification...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday