Close

2198 Results for "%EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F %E2%88%8F%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8 %3E%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%88%88 %EA%B0%95%EB%82%A8%EB%A3%B8%E2%88%82 %EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5%E2%88%81 %EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1%3C %EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%E2%88%80 %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%C2%B1 %EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%86%EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC every"

  • ZX81 16K RAM Pack
  • Details     from ZX81 16K RAM Pack
  • Counting the GPIOs... With the intention of using the Raspberry Pico micro controller, I needed to understand how many GPIOs would be required to carry all of the necessary signals: 16 X Address Lines8 X Data LinesMREQ signalWR signalRD signal....

  • Keypad matrix scanner for PIC32
  • Details     from Keypad matrix scanner for PIC32
  • KeypadAdding a 12 key keypad (0 to 9 with * and #) requires seven i/o pins. Each switch connects one row wire to one column wire. Connection scheme used in the test code is shown below. 300 ohm resistors protect the outputs from short circuits when multiple...

  • Voices of the past, speak up!
  • Details     from Voices of the past, speak up!
  • Introduction Talker/80 offers: DECtalk-Based Text-to-Speech (TTS) Synthesis: the Epson S1V30120 TTS chip on the utilized mikroBUS "TextToSpeech Click!" daughterboard from MikroElektronika implements DECtalk v5 - a natural sounding speech synthesizer...

  • 5 x 7 Flip Dot Display Driver
  • Details     from 5 x 7 Flip Dot Display Driver
  • Display Layout (from behind, left to right) A12345 B12345 C12345 D12345 E12345 F12345 (Z123) G12345 Connection Blocks (mapping) B1 F1 A2 G2 | E3 B4 F4 A5 A1 G1 D1 F2 | F3 A4 E4 B5 Z3 C1 E1 E2 | G3 D3 D4 C5 Z2 Z1 B2 D2 | C3 C4 E5 G5 Z1 Z1 C2 A3 | B3 G4...

  • Arduino Tester
  • Details     from Arduino Tester
  • I came up with a nice (from my own standpoint) circuit arrange that tester each and every pin of my Arduino-compatible board:- Pins 0 and 1 = Serial communication with a PC, through the "Serial.print()" command- Pins 2 and 3= an LED connected between...

  • Backbone Bus
  • Details     from Backbone Bus
  • I plan on using this bus as the backplane for supporting R&D for my Kestrel Computer Project. Signals are as follows:SYSCON Signals.50MHZ. A 50MHz reference clock generated by the backplane. NOTE: This doesn't mean that the bus has to run at 50MHz; you're...

  • A Better Turret
  • Details     from A Better Turret
  • Parts Bought the following parts: 2x NEMA 17 stepper motor - 68 oz in (400 steps/rev)1x Pololu universal aluminum mounting hub for 5mm shaft M3 holes (2 Pack)2x NEMA 17 stepper motor mounting bracket1x Nano 3.0 CNC board (uses A4988 stepper motor drivers)1x...

  • Archaeopteryx
  • Details     from Archaeopteryx
  • The XMega32E5 doesn't map perfectly to the Mega328, so we're going to have to take some liberties with the pin mappings.Instead of having a separate AREF pin for the ADC, the XMega32E5 shares this function with A0. So in this design, A0 is connected...

  • YGREC8
  • Details     from YGREC8
  • After the explorations with #YGREC-РЭС15-bis, I reached several limits and I decided to scale it down as much as possible. And this one will be implemented both with relays and VHDL, since the YGREC8 is a great replacement for Microchip's PICs....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday