These are the main features of the PicoSplit: 3D-printable with common FDM printers.Its shape is inspired by the Dactyl keyboard.Allows you to keep your hands natural and relaxed, even after hours of typing.Interchangeable wrist rests that magnetically...
If you are interested about story of this project, here you can read more about it 😊 I am planning to add more details to this project later. All necessary information are on my GitHub.
Features Beginner friendly through hole soldering.60 keys arranged in a familiar qwerty layout with number keys arranged in a numpad.SPI, I2C, and 2 additional GPIOs broken out. Aside from these pins all others are used to read the key matrix.Teensy...
First step was to map out the power supply and keyboard connectors. The power connector for the original hard drive is a 4-pin molex, and provides both 5V and 12V, which is suitable for the Pi and the screen respectively.The keyboard is a standard AT...
Replaced with new versionhttps://hackaday.io/project/175405-mini-piqwerty-usb-keyboard-iiKeyboard is designed as 2 layers first top layer - holes and button namessecond layer - buttons and controller ALL FIT in one 10x10cm PCB ORDER MICRO CONTROLLER...
A low-profile 40% mechanical keyboard with a Planck layout, programmed with CircuitPython.It's actually slightly misnamed, because it has 47 keys, not 48, as the space key is 2U.
Introduction In this example, the RTL8722 board emulates an HID keyboard connected using BLE. Please check detailed Procedures in the "INSTRUCTIONS" section below.
Using a Feather USB Host and Featherwing and loading a HID remapper to create typewriter sound effects for the most nostalgic typing you have ever experienced on a membrane keyboard.
This is a project for a wall mounted keyboard holder. It's designed in OpenSCAD, printable on any printer with a 200mm square build volume, and is currently holding an IBM Model M on my wall.Why am I doing this? Because I have too many keyboards, and...
A post was made on the /r/mechanicalkeyboards subreddit about an april fools day keyboard that was effectively a 25-key puck shaped keyboard. I decided to design one and try to make it just for fun.Going to 3D print the plate and case, hand wire it and...
This is a three parts synthy, combining the following Drones always on when turning (probably 40106) Melodic keyboard needs a keyboard of some sort rhythm with input from dynamo or encoder wheel on crank will also need a good generator...
I've decided to try and manufacture 10 K-type keyboards. This is a keyboard designed by Input Club and for me it ticks all the boxes for what a mechanical keyboard should be. There is some drama in the history of this keyboard, where Massdrop manufactured...