Close

606 Results for "《예약번호OIOX8489X83O6》3hours가격Ａ㉪force⑦3hours레깅스가격3hours레깅스ㅪplainly 3hours가격강남3hours 3hours후기Р3hours레깅스가격оperforming⒴"

  • ReHubJr Rehabilitation Helper
  • Details     from ReHubJr Rehabilitation Helper
  • Stroke is 30+ (not 60+ as earlier!)  now. Stroke is leading cause of disability.  The  spasticity is the most common  post stroke consequence. The rehabilitation of  lost motor functions must be made as soon as possible. The ...

  • Shop Air Injection Molder
  • Details     from Shop Air Injection Molder
  • The HeaterThe heater design is based on this machine.120v400W~3.33AThe heater unit will be 6" long and 1/2" OD. It will be heated by Nichrome wire ~95" long to provide approx 10 turns of wire per inch of heater. Using a calculator I have come up with...

  • Adjustable Urinal
  • Details     from Adjustable Urinal
  • I was watching AFCON match today in some sport bar and at the half time I went to the restroom to pee. While I was on my way a very short person (dwarf) passed by me ahead to pee because he had too many drink but the rest room has only a urinal commode...

  • Chest Arc Reactor
  • Details     from Chest Arc Reactor
  • My brother (who was the driving force behind my Robo-Roach) loves Iron Man. So, I decided to make the lil guy a chest arc reactor. I found a model of one on Thingiverse, and I followed it to a point, but I ended up needing to make my own parts to make...

  • EMDrive/satellite
  • Details     from EMDrive/satellite
  • OVERVIEW-------------------------------------------------------------------------------------------The EMdrive is derived from a closed cylindrical microwave waveguide. The main difference is that one end is larger than the other. When RF is fed into...

  • modulum
  • Details     from modulum
  • Modulum was made for an Electronic Music Studio class at Pomona College.It consists of four pieces of conductive rubber stretched across a laser-cut plastic frame. They are connected to a central pendulum and share a common ground.Each piece of conductive...

  • SRAM as replacement for EPROM
  • Details     from SRAM as replacement for EPROM
  • If you look at the datasheets for a 32K SRAM chip and a 32K EPROM, you'll see that the pinouts and data access waveforms are nearly identical. Here are the few things we need to deal with:- A14 needs to be rerouted from pin 27 of the EPROM plug to pin...

  • WaFilTer
  • Details     from WaFilTer
  • The WaFilTer is going to be composed of two main parts. Each of the two parts are going to be contain in a 5 liter bucket.The first part is going to be for the different types of filters. Those following elements are the different filters: a carbon filter,...

  • Truck Bedcover
  • Details     from Truck Bedcover
  • I plan on using a technique referred to as poor mans fiberglass to create the shell over shaped and bonded foam shell to create a bonded weather tight shell to direct the flow of air over the bed of my truck. doing this should prevent de-lamination (cavitation)...

  • [ModAir] Navigation Module
  • Details     from [ModAir] Navigation Module
  • OverviewThe diagram below provides an overview of the module:Features:GPSNavigation Waypoints (DTK,ETE,ETA,TRN)CompassTrue HeadingAttitudeGround speedAir speedAltitudes (True, Pressure, Flight Level)Vertical SpeedHeight Above RunwayOutside Air TemperatureDate...

  • Sorting Machine LEGO
  • Details     from Sorting Machine LEGO
  • In the project I used 4 LEGO engines, LEGO light sensor plus the Robocore 1.0.Project was made to distinguish lighter and darker spheres than the floor of main chamber.The most important thing in programing Robocore for this project was to strictly distinguish...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday