Close

818 Results for "%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%81%A3 %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9conspicuous%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%EC%85%94%EC%B8%A0%EB%A3%B8solid %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9%E2%94%82%C3%86%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0derivative"

  • MIDI Shoes
  • Details     from MIDI Shoes
  • basic code for using - updates later/* MIDI note player This sketch shows how to use the serial transmit pin (pin 1) to send MIDI note data. If this circuit is connected to a MIDI synth, it will play the notes F#-0 (0x1E) to F#-5 (0x5A) in sequence....

  • 16C2552 dual UART for RC2014
  • Details     from 16C2552 dual UART for RC2014
  • The 16C2552 doesn't need a lot of glue on the RC2014 side. A single 74HCT138 is used to decode the I/O space and allow the card to be placed at 80/90/A0/B0/etc with the second port 8 bytes above. The standard configuration used on non Z80 ports is to...

  • Trinket serial & analog terminal
  • Details     from Trinket serial & analog terminal
  • Hardware:Battery pack: 100%Screen: 90%Trinket pro: 80%RS232: To doTTL: 30%Rx/Tx: 50%RTS/CTS: To doAnalog (A0 & A1): 100%Main PCB: 30%Schematics: To doSoftware:HMI: 10%GitHub: To doSerial: 20%Analog: 60%Mechanical:Box design: To do3D print: To do...Altoids...

  • L.E.D. Table
  • Details     from L.E.D. Table
  • UPDATE 02/11/2017Previously mentioned bugs pertained to lots of noise while playing video streams. This was almost completely resolved by slowing down SPI to 8Mhz and increasing frame rate to 40. Another final part may be driving 5v SPI leds with a 3.3v...

  • Forced cooling without fans
  • Details     from Forced cooling without fans
  • According to some old data I posted back in july 2013, when I was installing it, the temperature of the LED test point is 110 degrees with no chimney, and 80 degrees after the chimney was added.Right now, I did a similar test with thermal imager. Without...

  • TPS63070 DaughterBoard
  • Details     from TPS63070 DaughterBoard
  • The selection of the feedback resistors is critical. The standard output voltage is supposed to be 3.3V. For the appropriate resistor values i just checked the datasheet which had a table with values. Since the I want to be able to select the output...

  • Robot grający na ksylofonie
  • Details     from Robot grający na ksylofonie
  • 1. Cel: Celem pracy jest wykonanie projektu urządzenia mechatronicznego lub   kluczowego elementu urządzenia mechatronicznego, zbudowanego na bazie podzespołów LEGO oraz przeprowadzenie procesu projektowego zgodnego z rzeczywiście używanym...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday