Background If you have been following Hackaday for a while, you will have seen on numerous occasions the KENBAK-1, regarded by many as the first commercial personal computer. Ten years ago Mark Wilson introduced KENBAK-uino, a reproduction...
Ghosh and Jain (1) showed how to charactize a simple, closed, piece-wise linear curve as a Fourier series in a single parametric variable. Such a formulation allows (see Tsow and Land below): interpolation of curves by sampling the parameter more densely.morphing...
At that moment in time, the "Hobby" computer was cut of the edge technology:- compatible with both of the major Z80 operating systems of the time: CP/M and ZX Spectrum- single (256 x 192) and double (512 x 192) screen resolution- hardware switchable...
ESP_8_BIT is designed to run on the ESP32 within the Arduino IDE framework. Schematic is pretty simple: ----------- | | | 25 |------------------> video out | | | 18 |---/\/\/\/----|---> audio out | | 1k | | | --- | ESP32 | --- 10nf | | | | | v gnd |...
According to some old data I posted back in july 2013, when I was installing it, the temperature of the LED test point is 110 degrees with no chimney, and 80 degrees after the chimney was added.Right now, I did a similar test with thermal imager. Without...
Sparkfun's design uses LoRA radios, which has library support for Arduino that makes it very easy to send and receive complete packets. If you're going to go that way, then it makes sense that they designed a multi-packet exchange. And there's nothing...
Counting the GPIOs... With the intention of using the Raspberry Pico micro controller, I needed to understand how many GPIOs would be required to carry all of the necessary signals: 16 X Address Lines8 X Data LinesMREQ signalWR signalRD signal....
This time I will show you how to make a sensitive Pulse Induction metal detector which is based on ARM STM32 microcontroller, which has significantly better features than Arduino and is also cheaper. It can detect metal coih at distance of 30cm,...
Technical specsThis breakout board targets the v3.x series of the Arduino Nano (and compatible clones), while trying to be usable with other boards like the Pro Micro and v2.x series of the Nano. It makes available Serial (TX/RX) line, Digital, Analog,...
1. Cel: Celem pracy jest wykonanie projektu urządzenia mechatronicznego lub kluczowego elementu urządzenia mechatronicznego, zbudowanego na bazie podzespołów LEGO oraz przeprowadzenie procesu projektowego zgodnego z rzeczywiście używanym...
COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...
Onboard Programmers are great On microcontroller development boards (such as ST Nucleo Boards) it's very handy to have an integrated JTAG programmer/debugger. If you would like to build your own board with an embedded programmer, things get a bit tricky.In...
This board can be powered several ways. The most popular way to power Feather boards is by using the USB port. This board is no exception. It works well across both USB and LiPoly batteries. The board is designed from the ground up to be power efficient...
I plan on using this bus as the backplane for supporting R&D for my Kestrel Computer Project. Signals are as follows:SYSCON Signals.50MHZ. A 50MHz reference clock generated by the backplane. NOTE: This doesn't mean that the bus has to run at 50MHz; you're...
Here's a promo video showing the details of how they work.Here's some potential use cases:night lightmood lampwedding lightsburning man propcandle alternativedorm room lightlearning toymusic festival signChristmas lightsbike lightIf you have any suggestions...