Close

1132 Results for "%E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 O1O%CE%9E5793%CE%9E7458%E3%80%8B %ED%8D%BC%EB%B8%94%EB%A6%AD%EC%85%94%EC%B8%A0%EB%A3%B8%EC%B0%A8%EC%9D%B4%C5%8B %E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 O1O%CE%9E5793%CE%9E7458%E3%80%8B %E2%87%92silver%E3%8F%82%ED%8D%BC%EB%B8%94%EB%A6%AD%EC%88%A0%EC%A7%91%EC%84%A0%EB%A6%89%ED%8D%BC%EB%B8%94%EB%A6%AD%E3%85%9Eproprietary %ED%8D%BC%EB%B8%94%EB%A6%AD%EC%88%A0%EC%A7%91%ED%8D%BC%EB%B8%94%EB%A6%AD%EC%85%94%EC%B8%A0%EB%A3%B8%EC%B0%A8%EC%9D%B4 %EC%84%A0%EB%A6%89%ED%8D%BC%EB%B8%94%EB%A6%AD%C2%B9%ED%8D%BC%EB%B8%94%EB%A6%AD%EC%97%85%EC%86%8C%EC%8B%9C%EC%8A%A4%ED%85%9C%EF%BD%97sworn%E3%86%89"

  • KeyDuino

  • Here some projects with KeyDuino: NFC car doors control NFC infinity tableNFC drawer lock  If you want one,  the nano is at 25$  and the Normal at 30$. and if you have any idea of NFC projects please feel free to share them here or in...
  • KeyDuino NANO

  • Here some projects with KeyDuino: NFC car doors control NFC infinity tableNFC drawer lock  If you want one,  the nano is at 25$  and the Normal at 30$. and if you have any idea of NFC projects please feel free to share them here or in...
  • Forex Display

  • In this project, you will need the following: HARDWARE COMPONENTS: gen4-IoD-32T10-way FFC CablemicroSD CardmicroUSB Cable4D-UPA Adaptor Board SOFTWARE COMPONENTS: Workshop4 IDEArduino IDE For more information please go to this link
  • Keypad matrix scanner for PIC32

  • KeypadAdding a 12 key keypad (0 to 9 with * and #) requires seven i/o pins. Each switch connects one row wire to one column wire. Connection scheme used in the test code is shown below. 300 ohm resistors protect the outputs from short circuits when multiple...
  • GroveHat for the Arduino Nano

  • Technical specsThis breakout board targets the v3.x series of the Arduino Nano (and compatible clones), while trying to be usable with other boards like the Pro Micro and v2.x series of the Nano. It makes available Serial (TX/RX) line, Digital, Analog,...
  • ZX81 16K RAM Pack

  • Counting the GPIOs... With the intention of using the Raspberry Pico micro controller, I needed to understand how many GPIOs would be required to carry all of the necessary signals: 16 X Address Lines8 X Data LinesMREQ signalWR signalRD signal....
  • AT29C256 Flash Programmer

  • Programmer Design OptionsStrip-board works well (I use A$8 41 x 144 board), but I did look at using a mini-Mega2560: I  used an on-board Arduino Nano as they are cheap (and I have a couple of them lying around) and they provide serial and power.But...
  • Forced cooling without fans

  • According to some old data I posted back in july 2013, when I was installing it, the temperature of the LED test point is 110 degrees with no chimney, and 80 degrees after the chimney was added.Right now, I did a similar test with thermal imager. Without...
  • RF Product Design HackChat

  • All events take place in the #Hack Chat, join us there. Curious about the black magic that goes into RF? This #RFChat is for anyone who has ever designed or considered designing something that talks on RF. Come hang out for 30 or so minutes and talk...
  • Ever Blooming Mechanical Tulip

  • Tulip consists of 6 petals each with 5 SMD white LEDs. Each petal is connected with one of the Arduino output pins. Blossom hides 7 NeoPixel RGB LEDs. From an electrical point of view, the whole flower is ground and veins in petals are a positive voltage....