Close

24373 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • RayTime
  • Details     from RayTime
  • Used tools 3D Resin printer Laser cutter Hand tools Chemicals for patinaI used TinkerCAD to design the model. It took a few iterations until everything was correct. After that the model was painted to give it a patina look

  • SimpleCircuit
  • Details     from SimpleCircuit
  • The idea is that you can use scripts to create schematic diagrams. Something like circuitikz in LaTeX, but with a bit more solving power. Spacing is handled by defining minimum distances of wires and between components, and the tool will automatically...

  • BeeStalker UsbLog
  • Details     from BeeStalker UsbLog
  • Some basic keyfacts:2 board design: 1 double sided PowerBoard and a 4 Layer PCB with a Compute Module 3 on itEverything is built do be modular. So you can easily exchange the Powerboard with an 5V regulator, connect your mouse, a keyboard and an USB-Graphics...

  • ScrapStrap
  • Details     from ScrapStrap
  • My primary goal for this project is to build a functional 3D printer for less than $150 (not including filament), but I really want to try and do it for less than $100. I'll be keeping a tally in the parts section, and a grand total here. The whole thing...

  • EZeeSample
  • Details     from EZeeSample
  • Initial ideas:Each slave will be equipped with a microphone and a speaker. Communication will be through a call/response sort of deal. I'll have to get some hardware built before I can experiment and figure out the best way to do this. I may need to...

  • Nano Fpv Tank Inspection Bot
  • Details     from Nano Fpv Tank Inspection Bot
  • After gutting the tank of its stock control board and replacing with the better receiver, escs and fpv system, I set about designed and 3d printing a new shell to hold everything in. Building this thing was a bit fiddly due to its tiny size, but all...

  • Light Switch reverse engineered
  • Details     from Light Switch reverse engineered
  • Step 1: I just took out the PCB and followed the traces and recreated the circuit. Step 2: Then I put everything together on a breadboard, fixed the drawn circuit problems, and tested everything. Step 3: Designed a new PCB with the changes needed so...

  • Hexapod
  • Details     from Hexapod
  • The general idea is to use the PI and camera to perform the inverse kinematic equations and to perform obstacle avoidance, this information is passed onto the servotor32 board to set the servo positions according to the IK equations. Everything will...

  • Open Source Tattoo
  • Details     from Open Source Tattoo
  • Like the description says, I'm looking to help in designing a functional tattoo (design.) I think it makes sense to design and produce the PCB first, and verify that it will function. Then upon validation of that, get a tattoo of the trace-art done on...

  • Workout Machine
  • Details     from Workout Machine
  • The extract/retract controller had a great big old capacitor hidden in the handle. In order to automate the machine I had to rewire everything to a relay board.The controller button was wired up to two pins of the microcontroller so it could detect if...

  • The Guild Hall
  • Details     from The Guild Hall
  • We are the Southeast's most fun adult playground! A membership-based venue with everything you need to learn, play, and network, The Guild Hall offers two computer labs, co-working offices, a video game arena, and more! Memberships range from $9.95 to...

  • Jaguar XJ6 EV Conversion
  • Details     from Jaguar XJ6 EV Conversion
  • The steps needed to complete the project (high-level)- Remove rust and bring car back to full roadworthy condition- Remove ICE- Install electric motor- Install batteries/BMS- Install motor controller/s- Connect everything up- DriveOf course there's a...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday