Close

4660 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

  • The nRF9160 Feather

  • This board can be powered several ways. The most popular way to power Feather boards is by using the USB port. This board is no exception. It works well across both USB and LiPoly batteries. The board is designed from the ground up to be power efficient...
  • Archaeopteryx

  • The XMega32E5 doesn't map perfectly to the Mega328, so we're going to have to take some liberties with the pin mappings.Instead of having a separate AREF pin for the ADC, the XMega32E5 shares this function with A0. So in this design, A0 is connected...
  • Self learning robot

  • video of experimentrobot stm32f303 : 72MHz cortex M4 with FPU (avr can be used too, for slow robots ^_^)line sensor APDS9950 : digital i2c RGB output, each have the some address, soIam using software i2c (with common scl)line follower problem common...
  • Norchuck

  • Pin Assignment: /* (AVR) UNO - Function MSX Remark ------------------------------------------------------- (PD4) D4 - UP-1 Port 1/Pin 1 Thumbstick (PD5) D5 - DOWN-1 Port 1/Pin 2 (PD6) D6 - LEFT-1 Port 1/Pin 3 (PD7) D7 - RIGHT-1 Port 1/Pin 4 (PC0) A0...
  • DIY LiPo Battery Capacity Tester

  • Supplies: Perf board or fabricated PCB arduino Nano Power resistors 10W - 7.8 Ohm Shunt Resistors 10W - 0.2 Ohm OLED screen filter capacitors - 100nf - (code 103) - to smooth out the input readings N-channel MOSFET - logic level - SI2302 (SMD) PINOUT...
  • Orao keyboard interface

  • Orao's keyboard input works by shorting connections between 6 data lines (D4-D7) and 10 address lines (A0-A9). When a key is pressed, the connection is shorted between corresponding lines to input a key press. I.e., to type "A", the key short address...
  • ScrapTrack

  • If you look closely in the picture, there is a LOT more on this robot than is coded yet. I've included a PIR sensor, a microphone, and what's not seen is the little Radioshack IR reflection detector. The plan, once I learn how to use that last sensor,...
  • Capacitive discharge spot welder

  • Core of this device is 20 x 4.6 mF = 94 mF capacitor bank with maximum voltage rated at 40 V which equals to 75.2 J of energy. Capacitor bank is charged via 2 A current source realized with U4 (LM317) - make sure to be able to heatsink 5 W average power...
  • Resto-Mod 8 bit microcomputer

  • This project is currently shelved while I complete a couple iterations of the "1978 Heathkit Digital D&D Dice Tower" I wish I had as a kid playing AD&D. But, don't fear it will get resurrected in a number of future projects including the  Digital D&D...