Close

24373 Results for "㈎ 뉴원더풀포커 ㉦ rgg799.top ㄽ 게이밍 노트 북 ㆊ 윌리엄힐사이트 ㉬ 온라인포커룸 ㅙ 고스돕홈페이지 ㄿ 리얼머니바둑이 ㆀ 빅뱅게임 ㉮ 백두산맞고"

  • TerminalVelocity
  • Details     from TerminalVelocity
  • Features: -trackpoint with custom readout circuit -lots of rgbleds(15 in the front and 21 underglow that i haven't fitted in any model yet) -replaceable usb C port(daughterboard on the back can be simply unscrewed and slides out) -hotswap sockets -slim...

  • HO Train Ceiling Mount
  • Details     from HO Train Ceiling Mount
  • One of things that I was worried about was making a box that was "stiff" enough to not cause problems with the track as it is being hoisted up. The track doesn't like to bend. I built a box that had plywood on both sides. It was 1/2" on top and 1/4"...

  • Embedded Digital Dashboard
  • Details     from Embedded Digital Dashboard
  • This project started as an Idea a couple years ago and has been a slow progress since then. It's a Raspberry Pi based car computer, that will be interfacing with my B-series motor swapped Honda Civic with an OBD-I setup. So far I've got a standalone...

  • Hydro-gravitic Generator
  • Details     from Hydro-gravitic Generator
  • As a note- the movement of the rig up and down the rails is governed by the inflation level of the hydrogen bladder. As the electrolysis fills the bladder, it eventually develops enough buoyancy to break free of the magnetic seal and begin travel up...

  • StrumPad
  • Details     from StrumPad
  • All the files are in the Dropbox folder linked here. IMPORTANT: use the included MIDI and Capacitivesensor Libraries when compiling the Arduino sketch because I had to modify the MIDI Library in order for StrumPad to work properly.Also piezo placement...

  • Snapchat spectacles
  • Details     from Snapchat spectacles
  • * Uses protobuf with a 4 byte prefix header that encodes a 'type' and length. For length, mask the top nibble. For type, mast all but the top nibble. 0 = unencrypted, 2 = encryption setup, 1 = encrypted. * ECDH is used to share public keys and produce...

  • Plant LED biofeedhack system
  • Details     from Plant LED biofeedhack system
  • The figure shown on the project board is my first attempt to demonstrate the multispectral computer vision plant biofeedhack system concept. The picture was taken with a modified LED grow light and Raspberry Pi noir camera. The picture shows different...

  • Peliputer
  • Details     from Peliputer
  • The first two iterations of this project were based on packaging up an ATX motherboard and PCIe graphics card and using a separate ATX power supply. When the Pelican Air cases were released it was time to get to what I was aiming for from the start....

  • oled earrings
  • Details     from oled earrings
  • This year I had a special gift for my girl. Earrings that feature an oled screen with animations of her favorite arcade game, Tetris. The original idea was to have tetris blocks fall from the top of the screen to the bottom and stack up. But in the End...

  • Weed-Wacker Bracket 2.0
  • Details     from Weed-Wacker Bracket 2.0
  • The bracket that holds the guard on my Whipper-Snipper snapped.  My model - TRADE TOOLS CG26A https://www.tradetools.com/product-range/outdoor-power-equipment/brushcutters/tradetools-brushcutter-26cc-d-handle-straight-shaft No mention in the manual...

  • fan launcher
  • Details     from fan launcher
  • My first attempt was simply boxes rotated around a central point. multiplying both the length of the box, and the number of boxes by the same amount to produce compatible number of teeth.  These teeth jammed far too oftain, i believe due to the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday