Inspired by Dave Pedu's 3D printed Kwikset keys and that the patents for the ABLOY PROTEC keys were set to expire in a couple of weeks, this OpenSCAD model generates keys for the ABLOY PROTEC line of locks. All files and further information...
I am looking for people who would like to help me expand this project!STM32 Firmware DeveloperSuper Nintendo Firmware DeveloperModelling for 3D PrintingAudio Electronics Stuff
This is my attempt to build an open source inkjet printer by myself. I started this project because I wanted to build a binder jetting 3D printer but could not find any open source inkjet printer designs for this. So I started trying to build one. The...
Workshop Details:3D printing onto fabric opens up many design opportunities, not only for areas within the realms of fashion but in functional areas too. 3D printing on fabric enables materials to fold or crumple in predictable, repeatable ways. Through...
The HEXA printer is a 3D printer that uses six linear axes to move the head, similar to a delta printer, with six degrees of freedom to control the position and orientation of the nozzle tip. Various benefits can be expected from posture control, such...
This 3D printed bench vise has a lot of exchangeable parts which can be modified by the user or replaced in case of a failure or breaking. The printing parameters of this 3D printing are as follows: Standard resolution: 0.2mmInfill: 15% trianglesWall...
Academic research has shown that a Savonious windmill design with: 2:1 aspect (height:width); 10% blade overlap; and a stack of 3 sets of half-cylinder blades offset by 120 degrees is within a few percent of the efficiency of more exotic shapes for Savonious...
I had some trouble formatting my report into a hackaday project. You can find all details of the study in the pdf file attached to the project, or on this page https://hackaday.io/page/13741-visualizing-the-mechanical-properties-of-3d-printing-filaments-basf-ultrafuse-data.Hope...
This is the first the first 3D design I developed for 3D printing, it turned out to be quite tricky since the PCB requires many irregular shapes to be able to fit and cover the components but it was a great learning experience.
This project does not have many details. Essentially it was an excuse for me to learn 3D CAD and to get something 3D printed for the first time. I think 3D printing is fantastic, but I am not particularly fascinated by the printing of gadgets and trinkets....
First try:3D Printing AVR Arduino Art Audio Automation BeagleBone Bluetooth Cameras Clock Drones Environment Hardware IoT LED Medical Music Radio Raspberry Pi Remote Control Robotics Rockets Satellites Science Security Software Virtual Reality Wearables...
Just another instant hack.3D Printing AVR Arduino Art Audio Automation BeagleBone Bluetooth Cameras Clock Drones Environment Hardware IoT LED Medical Music Radio Raspberry Pi Remote Control Robotics Rockets Satellites Science Security Software Virtual...
On our github one can find all files for 3D printing and laser cut: https://github.com/var-mar/circular_kniticAlso a step by step tutorial: https://github.com/var-mar/circular_knitic
I have created an instructable Here containing step by step instructions, drawings, files and designs. I have also included test data from my composites made using a DIY 3-point bend tester and various failed nozzle prototypes.