480 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

wireless microphone digital
Instructions from wireless microphone digital
now using 2 x hacked lyrat 4.3 boards ( removed SD card sockets ) 2 x SX1276 modulesESP-IDF IDEESP-ADF IDEHistoric Record....1st attempt worked but was for 2.4ghzI used the Wireless Audio Module / MD85XXP1 that can be found here http://www.raytac.com/products.php?subid=18...

Raspberry Pi Night Vision Camera Hack
Instructions from Raspberry Pi Night Vision Camera Hack
Software quick-start:For the purpose of this guide, we’ll be using MotionEyeOS (formerly MotionPie) to create our Raspberry Pi Night Vision Camera, as it is very slick, purpose-built and well supported. First thing you’ll need to do is download the image...

matrix2pi
Instructions from matrix2pi
Read through how I built mine in the project description. The pictures show almost all you need to know, and the text tells you the rest. Read it carefully - there are some important details you might miss. And definitely read it all the way through...

Affordable Reflectance Transformation Imaging Dome
Instructions from Affordable Reflectance Transformation Imaging Dome
Here’s the camera holder from the previous step:Small, neat, secure, easy to install – perfect for the right camera. What is the right camera? It needs to be a reasonably small camera that will lay flat/parallel on the wooden board when you insert the...

Best Raspberry Pi Projects for Beginners
Instructions from The best Raspberry Pi projects for beginners
If you're looking for a fun and easy way to get started with Raspberry Pi, then creating a simple project is the way to go. By doing this, you'll be able to get a feel for how Raspberry Pi works and how to use it to create your own projects. There are...

Wearable computer
Instructions from Wearable computer
On the raspberry pi, you may need to affix the battery pack to the pi. I recommend a rubber belt (of the variety used in small vacuum cleaners); however, several rubber bands will do.I recommend taking some foam and cutting a rectangular hole slightly...

Awesome Jacket
Instructions from Awesome Jacket
The Arduino was programmed to cycle through the sound files on the SD card mounted on the SOMO-14D. Each time a file is selected, a pulse was sent to the EL sequencer to coordinate the "light show effect". The Arduino also monitored the switch cct status...

Futurama's Jack dispenser
Instructions from Futurama's Jack dispenser
Go to the Raspberry Download Page and download N.O.O.B.S. Follow the documentation to install N.O.O.B.S on your SD Card. When it's done plug it into your Raspberry Pi, power it up and choose your Operating System to install.For the rest of the instructions,...

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ WRITE IMAGE TO SD ]wget "http://93.174.101.10/bt/09bc05ab03780f279390e9cf6a15c7c249f712e1/data/2014-01-07-wheezy-raspbian.zip"7z x 2014-01-07-wheezy-raspbian.zipSD_CARD=/dev/sdX # Change it to your SD card device namemd5sum 2014-01-07-wheezy-raspbian.img...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Warning: hacker construction projectIf you are interested in making something like this, be warned. This project is a total hack job and will not run on any out-of-the-box hardware I am aware of. Development boards are available, but would require modification...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut circuit design and hardware:Enclosure:The motherboard is shaped to fit tightly inside a standard ABS jiffy box which set its limited size. The box has cutouts to expose all motherboard connectors on the left side and a small speaker and antenna...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut firmware:Ethernut is an Open Source Hardware and Software Project for building tiny Embedded Ethernet Devices. It consists of a set of hardware designs all running an open source operating system called Nut/OS and a TCP/IP protocol suite named...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts. The progression of construction was arranged so that each stage could be completed and tested...

ArchWiPi - Raspberry Pi Wireless AP
Instructions from ArchWiPi - Raspberry Pi Wireless AP
Download my Arch Linux Wireless Raspberry Pi image: archwipi.img.tar.gz (252MB)Extract it. eg: sudo tar zxf archwipi.img.tar.gzWrite the extracted image to your SD card. eg: sudo dd if=archwipi.img of=/dev/sdb …change sdb if necessary. Don’t run this...

Smart Cap
Instructions from Smart Cap
Step 5: Setting up the voice recognition software for your DIY head mounted display Different screenshots from the head mounted displayI have prepared an interactive voice response system that responds to certain voice commands and gives you appropriate...

1
2
3
4
5
>
>|