3995 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

GLaDOS Glass
Instructions from GLaDOS Glass
What we're doing is exploring the data rate limitations of glass by streaming high quality video to the heads up display(HUD) while sending orientation data to the Beaglebone. Both the video data streaming from the camera through the Beaglebone and the...

McSlck
Instructions from McSlck
Install the latest fritzing and get the board file fromhttps://github.com/mali1741/mcslckHappy hacking!

Back To The Future Time Circuit Clock
Instructions from Back To The Future Time Circuit Clock
Make sure you remove the LED from pin 13 from the Arduino on the Time Circuit Main board or your keypad won't work correctly.

Back To The Future Time Circuit Clock
Instructions from Back To The Future Time Circuit Clock
Connect driver boards with ribbon cables. 7-segment display boards and led board uses 10 wire cable, 14-segment displays use 12 wire cables.Note that there is no 12 wire IDC plug, so I used 14 wire plug and left the last two wires unconnected on the...

Back To The Future Time Circuit Clock
Instructions from Back To The Future Time Circuit Clock
Load the sketches:DisplayController to display-controller boardMainController to main board

Back To The Future Time Circuit Clock
Instructions from Back To The Future Time Circuit Clock
Clone repository https://github.com/atheros/backtothefuture-clockYou'll find sourcecode, schematics and board designs there.

WeMo Garage Door Opener
Instructions from WeMo Garage Door Opener
Buy a WeMo and take it apart and grab the low voltage board.

WeMo Garage Door Opener
Instructions from WeMo Garage Door Opener
Next I would suggest hooking up the Reed Switches (open and closed sensors) and WeMo to the Arduino board and loading up the code and testing the logic. Feel free to add some serial.println commands to view the state of the FSM, compare that to...

Starfleet Communicator Badge
Instructions from Starfleet Communicator Badge
Print the shell. We obtained the original design from Thingiverse and then removed material from the back to mount the Bluetooth device and microphone. The current version can be found on github at https://github.com/TampaHackerspace/3D-Print-and-Model/tree/master/STNG%20CommunicatorWe...

Starfleet Communicator Badge
Instructions from Starfleet Communicator Badge
Assemble the badgebundle your wiring and place it into your 3D printed shell. Note that you might need to dremel the back of the 3D printed shell in order to adjust it make it snug.Test to make sure you have communication, then use a glue gun to set...

Universal Controller
Instructions from Universal Controller
Solder up the AVR + regulator onto a perf board, according to the schematic. Include programming headers (MOSI / MISO / SCK / RESET) and a 6 pin breakout for the PS2 controller wires you soldered last step.The schematic for this is below:

Google Blasst
Instructions from Google Blasst
Bread board the circuit for the Arduino.

ArcReactorX
Instructions from ArcReactorX
Program the board using Energia and MSP430 Launchpad!

The Dune Pain Box
Instructions from The Dune Pain Box
PLEASE NOTE: Before you dive right in and assemble your Wave shield, there are a few things you will need to take note of: Make sure that you use the 'Stacking headers' on your wave shield. It will be in the middle of the stack so that...

The Dune Pain Box
Instructions from The Dune Pain Box
First, here is the block diagram:You'll note that there are two relays in this circuit. These are used to connect the HV output to the hand electrode, and turn on the 12V supply to the Amp and HV power supply. You can spider wire them in...

|<
<
1
2
3
4
5
>
>|