Close

1545 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Unpacking
  • Instructions     from uECG - small open source wireless ECG sensor
  • Welcome, everyone! This is an instruction on how to use uECG kits that we sell, but it’s also useful if you want to make your own uECG. Or maybe you were just browsing Hackaday and accidentally found our projects. In any case, thank you for being interested...

  • Laser Layer Assembly (Layers 3-9)
  • Instructions     from Upright Laser Harp
  • These layers hold together the laser, photoresistor walls, and mirror assemblies. All the layers are the same except for layer 3, which has additional holes for mounting the top assembly. For each row, the laser/photoresistor and mirror positions alternate,...

  • Constructing the Enclosure
  • Instructions     from UnifiedWater
  • I started off with a large piece of plastic that I marked for cutting. I then cut it into pieces using a band saw and sanded the edges making them soft. (don’t waste your time trying to decipher the drawings on the table, did this part in school) Anyways,...

  • Setting Up Breadboard version
  • Instructions     from PALPi Retro Game Console
  • Before setting up the Breadboard version, the raspberry pi pinout looks something like this! but I'm using a custom GPIO adaptor (which I made from male and female header pins), when we add this adaptor on Raspberry Pi's GPIO Headers, Our Raspberry gets...

  • Introduction
  • Instructions     from Smart Home with Beetle ESP32 C3
  • Recently I brought a Samsung Galaxy Watch. I thought of doing something with this watch, and It's running on Wear OS, so it's almost like a smartphone Then I found Samsung has its own smart home control app called SmartThings, so it's easier to control...

  • Fourth meeting
  • Instructions     from Analog meter Arduino Clock
  • If you were able to get all the magnets glue in at the third meeting everything will be wrapped up at this meeting.  If you were not able too, then we will need to have a short fifth meeting. I do the same steps as the Third meeting.  Skip...

  • Fifth meeting
  • Instructions     from Analog meter Arduino Clock
  • We are going to put shellac on the box.   1.  Again give everyone wax paper and set of rubber gloves 2.  I use Bulls Eye Shellac Clear.   3.  I use a paper tower to spread it around. 4.  Have them do each side.  They...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • To get a good idea how we made the electrodes, you can read the project update entitled "The Hand Thingie".  If you want to use the same sensing set up we used, this worked well.  Any sort of Object that is fairly ergonomic and can have the...

  • Knowledge lock
  • Instructions     from Knowledge lock
  • INSTRUCTIONS :You need to shape the box, we personally used a laser cutter to cut in plexiglass (you can find the files we used to cut the box out in the files section). You can adjust the size of the edges but we recommend you leave the kerf as it is...

  • Starting the build
  • Instructions     from InspectorBot
  • It’s always nice to receive a Digi-Key box. It means more toys. Also, the first parts for the new build. I’m using an aluminum L bar to make the camera mount. This one is a 1/2” x ¾’. I measured and mark a 1 ½” length and also...

  • Install Guts
  • Instructions     from RPi 9000
  • Originally, I had a bunch of compartments, distancers and spacers precut to make the inside of the box a bit more tidy, but... I haven't really used them.I used a dishwashing sponge to keep the bluetooth speaker in place at the bottom, the lens was fit...

  • Put the parts together
  • Instructions     from Retro Slide Projector "Green-Edition"
  • Scrap all parts off the bulb holder including the wing-like metal airflow thingies (you will have to be a bit rough and break that parts) and the mirror. You should by now have a clean metal slate with a large hole on the top and some smaller holes on...

  • Step 3) Setup Pushsafer
  • Instructions     from BBC Micro:bit + WiFi + Phone Notifications
  • Pushsafer, we learned, is one of the easiest and reliable internet service which provides multi-platform push notifications. There is some free allowance of notifications but we quickly ran out of it and had to purchase 1000 extra notifications...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday