Close

101 Results for "%E3%80%8A %EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98 OIO%E2%86%978489%E2%86%978306%E3%80%8B%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E2%94%A6%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80world%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%82%AC%EC%9D%B4%EC%A6%88%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80promotion %EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E2%94%AB %E2%88%AB%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80decided"

  • The Components
  • Instructions     from SMART MUSIC IN BEDROOM AND BATH WITH RASPBERRY PI
  • The required items for this system may vary, depending on how big you want your multiroom setup to be. Here, we will assume the basic setup using one set of speakers for each room. Based on the intended scope of your setup, you can add or remove as...

  • Camera and LED Panels mounting
  • Instructions     from A DIY Imaging Fluorometer
  • Here is where the fun starts. Find the centre of the heatsink and drill a 16mm hole. This is to accommodate the USB 3 cable to connect the camera and the LEDs wiring. Put the USB cable through the hole and connect it to the camera. Please the camera...

  • Hardware setup
  • Instructions     from Adafruit Ethernet FeatherWing to Ubidots
  • 1. Plug in the Ethernet FeatherWing into the Feather board.  2. Connect one end of the Ethernet cable to the Ethernet FeatherWing and the other to your hub, router, or switch. Step 3. Programming With the following example code, we will publish...

  • Monolithic Cotton Supercapacitors
  • Instructions     from Monolithic Cotton Supercapacitors
  • I put the ammonia soaked cotton in a pipe, and beat the heck out of it to fully compress it with a hammer and chisel. You can use any kind of plumbing pipe, just be sure to drill a hole in one end cap so the pressure can be released. I used 2 inch pipe...

  • The Electric Fish Piano
  • Instructions     from The Electric Fish Piano
  • Set up your fish tank:Prepare fish tanks: 40+ gallon - Normal home10 gallon - ExperimentationAir pumpsWater filtersSubmersible heatersPVC pipe (fish like to hide in these)Treat the water: Dechlorinator (I recommend Tetra's AquaSafe plus)pH between 6.0...

  • Pneumatic Extra-thumb
  • Instructions     from Wearable, Soft Robotic Exoskeleton Gloves
  • The soft telescopic, extra thumb actuator is based on a urethane rubber (Smooth-On Vytaflex 40) structure designed for grasping assistance during the execution of ADLs. The foldable structure was designed in such a way that it does not influence grasps...

  • Intercom box and speaker box
  • Instructions     from A P100 Mask Intercom
  • The following is a chronological series of pictures meant to compliment the circuit diagram and parts list.  Breadboard version of project Perfboard version of the project Boxed version, internal; the battery is nickel-metal hydride type, 9V. It...

  • Acrylic Box Assembly
  • Instructions     from 2600 Magazine Storage System
  • I designed small 3D printed corner pieces to hold the acrylic sheets at a perfect 90 degree angle, and used blue painters tape to pull them together tightly. Using a syringe, I ran a small amount of Weld-On 4 down the length of the joint from...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday