First thing to do is create simple heater controller. My idea is to use PWM signal what will turn on/of heating element, and because PWM is running more than 1kHz, i can get very fine power control. Here is original circuit:Idea very simple. First i...
On this next link is where I got the info for sending the photos taken with its own email account .http://mitchtech.net/connect-raspberry-pi-to-gmail...I tested it by copying the script to send attachments in to the python editor on the rpi by first...
Ok I pored the cement in the tube with a blue foam board on the bottom glued to the sides. That seemed to work out well accept I stuck a blue foam board cutout with a hole cut out in it to keep the 2" pvc pipe in place. Bad Idea it moved the PVC pipe...
For the end of the base steps: Plug an outlet switch in between each outlet you want to control and whatever you want it to control. Not that you need a picture, but:Congrats! You now have a passable web-based home automation system. Stay tuned...
For each machine where you want speech recognition:Run the JarvisListBox app, and set it to run at start-up.If you feel comfortable with code, you can edit its commands in the ListBox constructor to make it more appropriate for your setup.Running microphones...
To build the light switches (I'm not using these, but they might work better for those of you who don't rent):Using the pictues below as guides, solder the relevant wires to the Arduino...I kid.There are a few important parts here: There's the Arduino,...
Building the blind minder breakout board:For this one, I think I'm just going to give a picture, a sketch, and the STL files. It's so simple it's not even really worth a full build log.Clockwise from the top left, the outbound pairs are:9V brick (for...
The blind minder itself:(STL files in GitHub)Print the spoolPrint the mountHot glue the spool directly to the motor shaftWrap a piece of duct tape inside-out around the existing stickDo the same around the inside of the spoolUse your girlfriend's hair...
Print all parts and sand itAll parts are available in multiple format (.obj/.stl is the more interessant) hereThis is all parts printed:This is the disposition of all of the parts:
Assemble itFor the head :Put the RGB LED.Then, fix the camera:And the two servomotors:Then, the high part of the body:The fix the down part and the base (One motor is missing because I don't receive it):Put the sticker:Get some wires:Build the first...
Run RORI on your computer or on a beagleboardGo clone or download RORI at https://github.com/AmarOk1412/RORIYou can get the server binary at this address : https://github.com/AmarOk1412/RORI/tree/master/RO...(The Arm version for beagleboard is in the...