Close

13109 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Clean Up the ImageOpen up the image in your editor of choice. We're going to have to make some changes.1. Turn the saturation all the way down to get a black and white image.2. Adjust the levels for maximum contrast.3. Invert the colors. What you want...

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Print Your Image on Transparency PaperGet yourself some transparency paper from Amazon. You remember, its the stuff they used on overhead projectors in elementary school. Don't even bother going to Staples or Office Depot. The guy gave me a weird look...

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Don Your Lab Coat and Rubber Gloves...because it is now time for science! Mix equal parts of solutions A and B. You will not need much. I found about 5ml of each to be just enough for a full page. Spread the solution evenly over a sheet of paper. Those...

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Expose the ImageLay the transparency on top of the photo paper and set it outside under a sheet of glass or acrylic. Professionals would use a UV light box (some of you may already have one for making PCBs), but 20 minutes in the California sun works...

  • Authentic Blueprints
  • Instructions     from Authentic Blueprints
  • Rinse the PaperThe paper will change color pretty quickly and get darker. It will not become the final shade of blue until later, though. So don't worry if it still doesn't look right.After 20 or 30 minutes, take the paper out and put it in the sink...

  • Peril-Sensitive Sunglasses
  • Instructions     from Peril-Sensitive Sunglasses
  • Analog 3 is the GSR (Galvanic Skin Response) sensor.The two contacts are conductive metal.  Normally two fingertips are used to keep touch with the contacts.I placed two copper contacts like so, in spots my index and middle fingertips naturally...

  • Peril-Sensitive Sunglasses
  • Instructions     from Peril-Sensitive Sunglasses
  • Analog 4 is the Temperature sensor input.The TMP36 outputs an analog voltage that represents the temperature.A simple formula gives the temperature based on voltage:float celsius = ((voltage * 1000) - 500) / 10;

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • Before starting the whc-switch service, you should add some components. You need a simple switch, a blue led, a red led and some resistors to match your led voltage.It is as simple as it looks like. After everything has been connected , you can start...

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • Now you can start building your device using the materials you choosed. If, like us, you could only get stereo jacks but you want to use them as mono, you can refer to this picture for how to solder it:Mono versionStereo versionWe can't get you so much...

  • Mk 16 Capital Ship MDM
  • Instructions     from Mk 16 Capital Ship MDM
  • Build Payload MPDB:1)  3D printed parts needed 1x MPDB 1a1x MPDB 1b1x MPDB 21) Cut Material: Cut 1" tubing to 212mmCut 3/8" tubing to 130mmCut 3/8" tubing to 30mm2) Construct Take 30 mm section of 3/8" tubing and place it into the center hole in...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday