Close

40 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

  • Assembling the pitch actuator
  • Instructions     from WinDIY - HAWT Wind turbine
  • One component that is supposed to make WinDIY more secure is the pitch actuator. It allows the wing’s angle of attack to be changed via a push rod. In case of an emergency (e.g. if the speed is too high) the angle of attack can then be changed so that...

  • Code
  • Instructions     from Create Your Own Apple AirTag
  • // You should get Auth Token in the Blynk App. // Go to the Project Settings (nut icon). char auth[] = "YourAuthToken"; // Your WiFi credentials. // Set password to "" for open networks. char ssid[] = "YourNetworkName"; char pass[] = "YourPassword";...

  • J1772 Hydra
  • Instructions     from J1772 Hydra
  • Prepare the internal mounting plate. You will drill holes to mount the two contactors, the power distribution bus, the ground bar and the standoffs for the boards. The plate can be divided logically into the top and bottom half along the center, which...

  • Tray and mounts
  • Instructions     from Racing Spider
  • Parts to Print1x Tray-full.stl  (or A, B & C for 6" print bed)6x Bearing-rib.stl4x spring-mount.stl1x Mount-mount.stl Parts6x 10mm screw10x 10mm counter-sunk screws (+4 for 3 part tray)18x 3mm nyloc hex nuts ToolsScrew driverSoldering Iron Assembly...

  • Before we begin…
  • Instructions     from Lou the Toilet indicator!
  • We'll be creating the Lou portion of the project. If anyone is interested in building the occupancy detector (using the magnetic door switch and light sensor) let me know!A few more parts: All the major components are listed in the component section,...

  • Front end assembly
  • Instructions     from OSUG: Open-Source Underwater Glider
  • Place a single 608ZZ bearing in each of “Syringe_clamp_front” and “Syringe_clamp_back” On the “Syringe_clamp_back” secure the bearing in place with the “Engine_bearing_fastener” piece, 3 M3 20mm...

  • POPgirl Enclosure Build
  • Instructions     from SHE BON
  • I made a status indicator that notifies me of my body's relative state of arousal! To help me visualize what's going on with the myriad of wearables I have set out to don at once, I've created an arm-mounted screen display that will tell me what I need...

  • Huzzah ESP8266 and Blynk.cc App
  • Instructions     from Huzzah ESP8266 and Blynk.cc App
  • Now setup Arduino IDE and prepare the sketch for upload.Add the Huzzah boards manager to the IDE preferences. http://arduino.esp8266.com/stable/package_esp8266com_index.json Open the boards manager, search for esp and install the esp8266 package (you...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday