Close

324 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남셔츠룸ㅬ レresidence㎱강남셔츠룸신사셔츠룸⑧appetite 강남셔츠룸강남란제리 강남셔츠룸╃강남란제리″names㏊"

  • GPS Clock
  • Instructions     from GPS Clock
  • Remove the paper from both sides of the acrylic front panel (remove the tiny paper from inside of the P and A first before peeling the rest of the paper off). Place a screw and nut through each hole, making sure to place the bolt head on the engraved...

  • Electric Kalimba
  • Instructions     from Electric Kalimba
  • Building the bridgeThe bridge is made from 2 pieces of scrap hardwood that I dumpstered. They needed to be as flat and strong as possible. First I marked one of the pieces by holding it up to the holes etched through the box. I drilled a hole the size...

  • Luggable PC
  • Instructions     from Luggable PC
  • Continue building the chassis base1 x 245mm Misumi HFS5 extrusion (no tap)2 x M5 10mm socket head screw3 x Misumi HNTT5-5 extrusion assembly nutTwo of the nuts are used to attach the base plate to the extrusion. The third nut is added to the opposite...

  • Luggable PC
  • Instructions     from Luggable PC
  • Attach the the other half of the baseFusion 360 object path: "Bottom"/"Bottom Right"Tap 6-32 threads as indicated by two blue circles.2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nut

  • Luggable PC
  • Instructions     from Luggable PC
  • Add extrusion to the chassis base1 x 245mm Misumi HFS5 extrusion (no tap)4 x M5 10mm socket head screw4 x Misumi HNTT5-5 extrusion assembly nut

  • Luggable PC
  • Instructions     from Luggable PC
  • Complete the chassis base frame1 x 155mm Misumi HFS5 extrusion (M5 tapped both ends)2 x M5 10mm socket head screw7 x Misumi HNTT5-5 extrusion assembly nutTwo of the nuts are used to attach the extrusion. Three of the nuts are for the top rail in the...

  • Luggable PC
  • Instructions     from Luggable PC
  • Attach power button and LED panelFusion 360 object path: "Mainplate lower"/"PowerButton"3 x M5 10mm socket head screwFor extremely deep ATX motherboards, you will need to also tap the diamond location with 6-32 and install a motherboard standoff there...

  • Luggable PC
  • Instructions     from Luggable PC
  • Attach tallest extrusion1 x 425mm Misumi HFS5 extrusion (no tap)2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nutThis is the extrusion we drilled a hole in step 4, be sure the hole is oriented front-back and not side-to-side. (We...

  • Luggable PC
  • Instructions     from Luggable PC
  • Attach other vertical extrusion1 x 405mm Misumi HFS5 extrusion (no tap)2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nutAttach to the power button panel using two sets of M5 screw and extrusion nut.

  • Luggable PC
  • Instructions     from Luggable PC
  • Install panel for face of power supply unitFusion 360 object path: "PSU Bay"/"PSU Face"1 x M5 thread tapped at blue circle location4 x M5 10mm socket head screw4 x Misumi HNTT5-5 extrusion assembly nut

  • Luggable PC
  • Instructions     from Luggable PC
  • Install panel for other side of PSU bayFusion 360 object path: "PSU Bay"/"PSU Side"1 x M5 thread tapped at blue circle location4 x M5 10mm socket head screw4 x Misumi HNTT5-5 extrusion assembly nut

  • Luggable PC
  • Instructions     from Luggable PC
  • Install one of two top corner connectorsFusion 360 object path: "Mainplate upper"/"TopR corner"2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nutOne pair of screw/nut combo attaches to vertical extrusion, the other pair is in place...

  • Luggable PC
  • Instructions     from Luggable PC
  • Repeat for the other cornerFusion 360 object path: "Mainplate upper"/"TopL corner"2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nut

  • Luggable PC
  • Instructions     from Luggable PC
  • Install handle on top extrusion1 x Misumi HHDFL19 handle2 x M5 10mm socket head screw2 x Misumi HNTT5-5 extrusion assembly nut
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday