66 Results for "raspberry"

Solder the Raspberry Pi Pico and the encoder
Instructions from PicoLight - Minimalist Light for Product Shots
Next, solder the back of the LED matrix, using a soldering iron this time, in this order: place the Raspberry Pi Pico on the footprintplace the 1x2 male pin header through the pin holes of the Pi Pico and through the PCB as pictured below (these pins...

Building the Raspberry Pi GPIO Connector and the shutdown button
Instructions from Blockchain Camera
TOOLS PCB Board CutterNipperTweezersSoldering StationSolderCutter Knife COMPONENTS Universal Prototype Board 95x72mm 1.6mm thickTACT Switch SKHHLPA010Pin Socket 2x5 2.54mm Pitch0.3mm Polyurethane Copper Wire 100mm1mm 2 Pin Flat Capper Cable 550mmVinyl...

How to solder Raspberry Pi Zero W to the main PCB
Instructions from Pocket Cloud Server (Final version)
The Pocket Cloud PCB has written instruction on the back of the PCB for you to solder it to the pi zero w. Things you will needA soldering ironSolder4 thin metal / copper wireA Pocket Cloud Server integrated main board (the PCB)Pi zero w and micro SD...

Put Everything Back Together and Connect the MP3 Module, Cat Feeder PCB Override and Motion Detector to the Raspberry Pi
Instructions from Magic Flute of Rat Mind Control w/ Raspberry Pi
The automatic cat feeder PCB, DFPlayer module and motion detector should be connected to Raspberry Pi as directed above. You don't need to power the feeder PCB and everything else runs on 5v so just connect the motion detector and DFPlayer to the 5v...

Flypi - cheap microscope/experimental setup
Instructions from Flypi - cheap microscope/experimental setup
Instructions overview:This build is pretty simple and consists of few steps:Printing the necessary parts from the scad fileSoldering all necessary components to the PCBSetting up the Operating System for the Raspberry Pi Fixating components to the printed...

Materials Needed
Instructions from SIGHT: For the Blind
Here are the components and materials that you needed to do this project. Take your time and collect everything! Main Components: Raspberry Pi 3 Raspberry Pi Camera Module(5 Mp) Micro Push Button 1K Resistor General Purpose PCB Tools: Soldering iron...

Secure the pi zero w
Instructions from Pocket Cloud Server (Final version)
Place the pi zero w on top of the PCB at the location written "Raspberry Pi Zero W " and secure it in place with double sided tape.

Pi-Berry Laptop-- The Classic DIY laptop
Instructions from Pi-Berry Laptop-- The Classic DIY laptop
Assemble the components on the baseNow we are starting to putting the laptop. To start with we start to assemble the PCB's and other components on the base. 1) Screw the raspberry pi 2, and the display driver on their appropriate locations.(SEE PLANS)2)...

Hack Automatic Cat Feeder Dispensor
Instructions from Magic Flute of Rat Mind Control w/ Raspberry Pi
The green PCB logic runs at 1.5v. All I am really interested when it comes to these PCBs is motor control. There is a manual override button which turn the motor on and distributes food as long as you keep the button pressed. Bingo. I solder wires to...

Hardware setting
Instructions from Free Stress Gaming
To deploy and starts working with this device, you need to follow some steps. Connect PCB adaptor with Wrist sensor by RJ45 cableConnect PCB adaptor pins with Raspberry Pi pins as shown in below table

The master module
Instructions from The Airdrum - Make music while moving
We've designed the PCB in a way that all the panels are exactly the same. The only difference is that there's a raspberry pi beneath the PCB as i2c master and that the aux connections need to made for the audio.

Pi-Berry Laptop-- The Classic DIY laptop
Instructions from Pi-Berry Laptop-- The Classic DIY laptop
Put the Base and Frame together To make a basic chassis to work with, Put together the frame we built (Veneer wood) and the base of the laptop.1) Mark locations of the charging port and the raspberry pi on the base.2) Using dabs of hot glue secure the...

Get the Parts You'll Need
Instructions from Raspberry Pi Pico Matrix Touchscreen Keyboard
This project contains two main parts, a Raspberry Pi Pico and an ILI9488 TFT with touchscreen. You can buy these from various resellers. I have provided some links where you can get them. You will also need a way to connect the screen to the Pico. You...

JudgeTron 9001
Instructions from JudgeTron 9001
Okay, what does a JudgeTron need? My idea was to use neural networks embedded in biological units to do the whole judging thing. These biological units unfortunately don't have native electrical interfaces: I couldn't just put a RJ45 into them and have...

RaspiTrap V1.0
Instructions from RaspiTrap V1.0
Infrared BarrierTo detect if a mouse is inside, I made an infrared barrier.It was build on breadboard for test, but I was too lasy to make my own PCB, so I ordered it in China.It took one week and the result is stunning.I want to use an external power...

1
2
3
4
5
>
>|