Close

3515 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • Portable LED Floodlight
  • Instructions     from Portable LED Floodlight
  • Spend some time on your LED and battery selection. These are the two most expensive items, and of course the most important.In my case I'm trying to light a volleyball court. The light I'm considering is available in 30º spread or 60º spread....

  • Portable LED Floodlight
  • Instructions     from Portable LED Floodlight
  • Wire up the business end too. A few extra zipties to keep tension strain off the crimp connections.The lights included some stainless brackets and hardware. The light to pole interface I had to get creative.. a few 90º brackets and a hose clamp...

  • IRK! Infrared Remote USB Keyboard
  • Instructions     from IRK! Infrared Remote USB Keyboard
  • Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

  • Trombino
  • Instructions     from Trombino
  • Use some more epoxy to affix the button board above the handle.

  • Super Mario Unlimited

  • Instructions     from Super Mario Unlimited
  • First - If you have further questions on what was actually done, take a look at my two other videos on itCreating a Mr Gimmick Cart and This one I did on Earthbound, showing some wiring that is commonly required. There is a fabulous website that has...

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • Mirror Mounts0Mirror Mounts… where to begin, in many ways… these are the make or break it for this project. These have some very high tolerances and requirments. Especially considering I am doing this all by hand, after all, the goal of this project...

  • Low Cost CO2 Laser Build
  • Instructions     from Low Cost CO2 Laser Build
  • Assembling the tube1And now for assembling the laser tube itself. Things needed for this will be a bit of JB weld, a long thin dowl that fits inside your mirror mounts. This will help align them, much better than eyeing it. You will also need some 3/8th...

  • DIY Variac
  • Instructions     from DIY Variac
  • After some looking around I got this one for 30 dollars.It was bare, but that is ok. I looked around for a container for it, and could not find one that I liked. I considered building one out of wood, but chose against that as well. One option was to...

  • 650nm 5mw Laser Build
  • Instructions     from 650nm 5mw Laser Build
  • After some scrounging around I found a cheap axis laser housing with diode and driver board still intact! For me, this is a mirracle as most of the time, I usually disassemble things when I first get them.After I scrounged up the rest of the parts I...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday