Close

603 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Two-handed chording keyboard
  • Instructions     from Two-handed chording keyboard
  • Assemble materials. If possible, try the mechanical switches to suit your hands. I used the Cherry MX Clear for all buttons. Perhaps, MX Blue would be better for Alt, Control, and Shift. Anyway, for the top boards you need "Tactile", and for the bottom...

  • Attach Top to Stack Light
  • Instructions     from Stack Light Monitor
  • Using a #2 phillips screw driver, remove the two mounting screws from the stack light.  Fish the wire bundle through the large hole in the top enclosure piece.  Use the two mounting screws to attach the top enclosure to the stack light.Trim...

  • DIY RaspCade
  • Instructions     from DIY RaspCade
  • 3. DisplayThe screenThe screen we are using was part of a now discontinued case for the Raspberry Pi called the Qubit. It is a 7-inch IPS screen with a maximum resolution of 1024 x 600 and looks fantastic when up and running. If you are looking for the...

  • matrix2pi
  • Instructions     from matrix2pi
  • Read through how I built mine in the project description. The pictures show almost all you need to know, and the text tells you the rest. Read it carefully - there are some important details you might miss. And definitely read it all the way through...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Gantry Assembly 2 hoursThis is the estimated time it will take to assemble the Gantry.Step 1: Assemble the Gantry PlatesGather and lay out all of the parts. You will need:Two Gantry PlatesEight complete V-wheelsEight M5 x 30mm screwsEight M5 locknutsEight...

  • Building the AUV - Internal
  • Instructions     from Project Albatross
  • The internals of the AUV performed the heavy work of actually taking water quality measurements and controlling the submersible's buoyancy. Evidently, it also required a sophisticated mechanical design to fit the necessary components into the confined...

  • Instructions:
  • Instructions     from Laser XY Scanner
  • Step 1: Gather Your Components Laser XY Scanner - BOM I usually like to source my parts from DigiKey, but the low-cost options on Amazon are hard to beat sometimes. This list is just one of many sources for each component in the BOM. There are of...

  • Breathing Detection
  • Instructions     from Breathing Detection
  • Labview and Arduino IntroductionLabVIEW (short for Laboratory Virtual Instrument Engineering Workbench) is a system-design platform and development environment for a visual programming language from National Instruments.To learn about LabView check official...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • #!/bin/bash##recording1.shirsend SEND_ONCE --count=2 radioshack BTN_4irsend SEND_ONCE --count=2 radioshack BTN_6mencoder tv:// -tv driver=v4l2:norm=NTSC_M:width=720:height=480:outfmt=uyvy:device=/dev/video0:input=0:fps=25:buffersize=16:alsa:amode=1:forcechan=2:audiorate=48000:adevice=plughw.1,0:forceaudio:immediatemode=0...

  • Smart Solder reflow oven
  • Instructions     from Smart Solder reflow oven
  • First thing to do is create simple heater controller. My idea is to use PWM signal what will turn on/of heating element, and because PWM is running more than 1kHz, i can get very fine power control. Here is original circuit:Idea very simple. First i...

  • Futurama's Jack dispenser
  • Instructions     from Futurama's Jack dispenser
  • In order to add wireless access point capability to your media server, you need to install hostapd (hostapd_8192cu from AUR if your wifi dongle is based on a rtl8192cu chipset) and dhcp. If you have installed yaourt as stated in an upper Build Instruction,...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday