Close

14060 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Breathing Detection
  • Instructions     from Breathing Detection
  • Labview and Arduino IntroductionLabVIEW (short for Laboratory Virtual Instrument Engineering Workbench) is a system-design platform and development environment for a visual programming language from National Instruments.To learn about LabView check official...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • MSP430G2231 Code:For a starting point I used this excellent project from Stefan Wendler. MSP430G2231 Software UART. The code below replaces main.c from his “timer-a-uart” branch.#include #include #include "uart.h" #define BUTTON BIT3 //...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Python Code:import serial import subprocess ser = serial.Serial() ser.port = "/dev/ttyACM0" ser.baudrate = 9600 ser.open() value = 0 blinkcount = 10 while 1: p = subprocess.Popen(["linphonecsh", "status", "hook"], stdout=subprocess.PIPE) result = p.communicate()[0]...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Yate(Yet Another Telephony Engine):Answering Google Voice calls that are forwarded to Google chat is tricky if you don't want to use the Gmail chat application. I found the most functional results were achieved by using Yate, to create an SIP server...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Linphonec and Linphonecsh:This is the softphone I used to interact with the python program. It is a little particular to get working so here are some directions. First run linphonec once to create a .linphonerc configuration file in your home folder....

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Unscrew the circuit board and pull off the RF shield. Be carefull because once you take the board out there will be nothing holding the buttons in.

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • As you can see in the picture, the screen is glued onto the PCB with a thick piece of aluminium between them. Now we have to remove the LCD screen and plate from the motherboard. This is tricky. You must be extremely careful, because the LCD is made...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now is a good time to cut your EL panel down to size. Lay the LCD on top of it and trace around it with a marker. I chose to have the leads going out the right side (facing the front of the screen). You can cut the EL panel with scissors. You might want...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now we need to get the metal plate off of the screen. This is the most dangerous part of the project. Get some rubbing acohol and pour it into the holes in the back of the plate. This will help dissolve the adhesive holding it to the screen. I let the...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now is a good time to test your LCD and make sure it still works. Load the batteries back into the back half of the case. Press the motherboard against the back half of the case so the battery connectors make contact. Use a screwdriver or some other...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • On the back of the LCD there is a reflector and a polarizer. This diagram shows the different layers.The reflector is a thin foil sheet on back of the polarizer. It needs to be removed so the backlight can shine through. The polarizer is a thicker plastic...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Assemble your LCD sandwich with the EL panel on the back, then the polarizer, then the glass. You can use some scotch tape around the edge to hold everything in place. I used some putty to stick the whole thing to the PCB, but you could also use some...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Find a good place to mount the push button that will control the backlight. I chose to put mine on the left side of the calculator, as you can see in the pictures. This was a very tight fit though. Some other suggestions would be on the top or under...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Carefully bend the EL panel leads so they fold around the back of the PCB. The panel can bend pretty far, just don't crease it.Now install the board back in the front half of the case and screw it down. The EL panel leads will stick up through gap between...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Use hot glue to mount the inverter and push button in the back half of the case. Fortunately theres lots of space inside the TI. Use lots of glue so the button stays in place when you push it.
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday